This is indeed very weird. Unfortunately I don't have any experience with your motherboard but hopefully somebody knows what's going on.
@TommyL BTW, what bmc/bios revision are you running? On SM there is R 3.48 for BMC and R 3.3 for BIOS
Could be a bunch of things. If you stripped it down to bare minimum and it's still not powering on then reset bios and run it with one stick of ram and leave only one fan connected. There is a slim chance it is a failed fan. Just keep trying, it moght be something you missed.
Good luck man. Working as a freelancer can be a real bother when It comes to getting paid sometimes. If you had any connection with the client while you were working for the company it will most probably go smoothly.
@OP: Knowing the IP might not be much help if they know what they are doing but make sure to check the teamviewer logs eitger way. Hopefully the guy behind this is not smart.
Try to see if they fit, don't put much pressure. If they fit try to find marks or symbols on the board to make sure polarity is correct. Also, got a multimeter handy?
No idea if there is a longer one available. I would just mod the cable, put some shielding and be done with it, especially if it's just one cable. Good luck!
Chances are the drivers won't work unless you can do some hackery on the config files. Best bet is to find someone on the forums that has one of these and are willing to test the drivers for you. Either way good luck.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.