btw, possible versions for min_protocol and max_protocol are probably as following (from illumos-gate-master/usr/src/lib/smbsrv/libsmb/common/smb_cfg.c)
/*
* We store the max SMB protocol version in SMF as a string,
* (for convenience of svccfg etc) but the programmatic get/set
* interfaces...
Is it possible that it is not fixed yet?
In the feature I see that there is still a blocking issue: Feature #14047: Add support for SMB 3.1.1 AES-256 - illumos gate - illumos
I am still on W10 and maybe it is a different issue, but I lately updated my OmniOS to omnios-r151038-96eabf6ba4...
I am desperately trying to get more than 10gbe over my X550-T2 nic over to my ESXi with a X710-T4.
The exact flowchart:
1) Windows 10 Pro, X550-T2 with both ports teamed using IEEE 802.3ad Dynamic Link Aggregation (according to Intel PROSet Adapter Config Utility)
Settings:
Jumbo-Packets MTU...
I upgraded my server this week and everything is running fine (omnios *34 already).
My LSI 2308 based controller was ditched anyway as it was onboard previously, now having a 3008 which works just fine.
btw, if someone tries to deploy the latest stable OVA template from napp-it in ESXi 7.x you...
Swapped slot (although they are all directly connected to CPU), re-flashed the controller, now it also has the mpt3x64.rom flashed (which was missing when shipped for some reason) if that matters for anything.
Already had nightmares about missing support by Epyc Rome or changes in VMware7 ...
Hi,
I just upgraded my server from 6.7 with an older SuperMicro board (including an SAS2008 controller) to 7.0 and an SAS3008 controller.
Exact product: Broadcom SAS 9300-8i, LSI00344 (should be a HBA in IT mode as far as I know?)
In ESXi that controller is not listed as SR-IOV / Passthrough...
The page which updates after pressing ok shows indeed:
ACL_reset: initiate reset operation
/usr/bin/chmod -Rf A=user:root:rwxpdDaARWcCos:fd-----:allow '/repository/nfs/Keksi'
But doesn't update further.
After this try I saw that there was a root full permission afterwards (no default...
Hi,
I am working on a pretty new pool, ACL inherit/mode are passthrough/passthrough.
I set up the main folder with the ACL settings I wanted, then clicked on "rest ACL's", made sure "current folder" is selected in the drop-down, checked "recursive" option.
But instead of every sub-folder...
Thanks, current ratio is 1.00 because apparently I have to enable the feature also on the ZFS filesystem and not only the pool :(
(/edit: or at least it is not sufficient that the pool lists the feature as activated)
Hi,
is it possible to see the real space usage of a file in ZFS when e.g. lz4 compression is enabled?
When I do a ls -l of a folder it looks like it shows the non-compressed size (or compression is completely ineffective for those files) though.
Anyone already hampered with that kind of stuff...
I also for the first time now learned about the inheritance-methods (pass-through, restricted, ...). I always saw it when checking my pools on the far right but never really gave it any notice.
For now I just copied all the data via my windows workstation as also cp tool did create those...
I saw in the options info of rsync that it also has parameters to preserve ACL, but the thing is I don't want to actually "preserve" the old ACLs because they are a mess and the new pool has nice pre-configured group access rights that I can assign to whoever user I create afterwards.
Currently...
Is there a way to suppress this?
I mean so far as I see these (almost full rights for owner@, read_attr_set for group@ and everyone@) they will not really hamper with anything but with a bit of OCD that looks horrible in my neat designed group-based ACLs. Copying data onto the folders via...
Hi, I have a LSI SAS 2308 on an X10SL7-F connected to two Intel RES2SV240 and those to SC846 BPN-SAS2-846EL1 backplane and Inter-Tech 4U-4316L backplanes like this:
Using latest OmniOS OVA template from your site.
It seems to work when enabling (thought this was already enabled based on the...
Hi,
I now added a second JBOD chassis to fit more disks on my server.
Now I wanted to create an appliance map so I can recognize the correct disk immediately and also see temperatures etc. of each disk in the map.
Although there is a strange issue that some disks have the same enclosure id as...
Not sure if WD tools would work on generic USB converters as they probably would only see the usb controller and not the disc directly and no low level access (at least I had problems with that in the past).
Hiren is already running though. Unfortunately no windows remote desktop seems to be...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.