Search results

  1. A

    UK Mellanox SX6018 - £400 BO Accepted

    Seemingly reasonably priced for the UK - Mellanox SX6018 18x QSFP 56G FDR Managed Switch | eBay They also have a SX6036for £388 but only one. - Mellanox SX6036 - 36xQSFP FDR InfiniBand Switch | eBay
  2. A

    Juniper EX4300 w/o Firmware :-(

    The Process to install the OS is the same for all EX switches. Its described here: [EX] Performing and resolving any common issues during Format Install on legacy EX platforms also there is no Base licence on the EX and all the licencing is optional so you can use all the features with a nag...
  3. A

    Juniper EX4300 w/o Firmware :-(

    Are you getting the U boot output from the console when you boot? if not the your SOL and you have a paper weight
  4. A

    EU Gigabyte Mainboard MC12-LE0 Re1.0 AMD B550 AM4 Ryzen

    Thats good to hear. the 4 i bought turn up on Wednesday si ill probably be doing the same thing.
  5. A

    Intel 82599ES NIC, cannot find a working driver for Win11

    I cant remeber how i did it but i definatly got it to work. it was however a bit jank. the x710 is fully supported on win11
  6. A

    Intel 82599ES NIC, cannot find a working driver for Win11

    Intel dropped support for that card on win11. you can use the windows 10 drivers without issue iirc
  7. A

    EU EU/Ger - Quanta TS42-2U 4node scalable (pure compute)

    Speak for yourself :D . Also I'm looking to use them at home and the noise of 2u units tends to vary wildly hence asking
  8. A

    EU EU/Ger - Quanta TS42-2U 4node scalable (pure compute)

    what is noise like on these does anyone know? I'm expecting very noisy as alot of quanta gear is.
  9. A

    USA Chelsio T6 100Gbe Ethernet NIC

    Ebay DE has Vat included
  10. A

    Malicious ads or redirects?

    I'm still getting this from the main page.
  11. A

    Qotom Denverton fanless system with 4 SFP+

    Probably the Intel SOC ones which I believe are x557
  12. A

    EXPIRED UK/EU - C240 M5 26sff - 40gbe

    Back again at a £200 but with both coolers https://www.ebay.co.uk/itm/275846263303
  13. A

    Full IP tables budget routers

    vyos on commodity hardware could manage this. Are you taking multiple tables from multiple upstreams or just one upstream? If is one upstream then you can take just a default route and use a cheap layer3 switch.
  14. A

    EXPIRED UK/EU - C240 M5 26sff - 40gbe

    Rails from the same seller - £20 Cisco UCS-C220 C240 M3 M4 M5 retractable Rack Mount Rail kit PN: 800-43376-02 | eBay 8 Caddys from same seller for - £40 8 X Cisco UCS C220 C240 C480 ML M5 SAS/SATA 2.5" HDD Caddy 74-113290-01 w/screws | eBay
  15. A

    Fortigate 300D unresponsive to serial with errors on boot

    I have a strong feeling the internal ssd is dead
  16. A

    QNAP QSW-M7308R-4X is a 4x 100GbE 8x 25GbE Switch

    would be nice if it had MCLAG support but that may be hoping for too much :D
  17. A

    Mellanox Switches - Tips & Tricks

    Anyone know if these can be converted to ethernet? New Mellanox 36-port MSX6790 SX6790 QSFP QDR InfiniBand Switch EMC OEM 2 x PSU | eBay Edit: No they are unmanaged EMC switches
  18. A

    JunOS EX4300 17.1R2

    only if you want to preserve your config. even then you are probably fine. Also why are you going to 19? 21.4 is the latest and i would strongly recommend that
  19. A

    AliExpress Mini PC Xeon D1581 $450

    Im tempted to pick up a few of these for ESXi nodes
  20. A

    JunOS EX4300 17.1R2

    Its not even available for download on the Support portal. I would backup your config and just make the Jump to 19.