Search results

I am really wondering what this means for RHEL. To me it looks that IBM wants RHEL to focus on other products that support the IBM product portfolio. RHEL is part of what they got when they bought RedHat but was more of a burden than advantage for them. RHEL is for IBM only interesting as a...

I was wondering why you wrere looking so worn out on the latest videos... Thanks, there was a lot of intersting stuff. I especially like the Power10 article

I loved it. I like the somewhat informal tone, still giving some good food for thought... Are you inviting all STH users to the party?

On the Mikrotik forum I saw today that the CRS317 will get L3 hardware offloading support. I have seen no figures for the real througput on them. See: Manual:CRS3xx series switches - MikroTik Wiki

elrepo.org has most if not all deprecated drivers. If you know the name of the kernel driver you need, check if they have that driver for C8... So probably there is no need to replace the H310

Instead of the CSS/CRS326/ CRS317 combo you may also want to look at the CRS328: 4 SFP ports + 24 1G ports with POE.

If using a single /24 range is ok, you could let the modem do the NAT. If you then turn DHCP off on the Asus you could connect the LAN connection of the Asus to the switch, ecffectively bridging the Wifi on the asus to the 192.168.0.0/24 of the modem. The modem will then provide DHCP to the...

I really miss the CRS328 in this overview: 4 10Gb ports + 24 POE 1Gb ports, is that model not available in the US? With 4 10Gb ports it might fit a lot of cases where the CRS305 is just too small, and you need additional 1 Gb ports, especially with POE. It has served me pretty well in my home...

Thanks! This looks much more like it was before. I am happy

I really miss this in my workflow. Is there chance we get this back?

@Patrick: I am ok with the changes, but miss the unread messages counter at the top of the screen :cool:

If I look at all the STH reviews for SFP+ to 10Gbase-T modules, none seem to support more than 30M. I would therefore make sure that the longest run is less than 30M if you want to run 10Gb. Or am I missing something? I am running 10Gb over 7M Cat5, and that seems to work, but seems to be on...

Your problem may be related to STP: is there a loop between the i350 and the Mellanox where a switch decides to block the Mellanox?

I have one VLAN for Unifi management: the APs and the controller connect over that vlan, and nothing else. Each SSID has its own VLAN separate from management. I do allow SSH into the management VLAN for access to the APs as convenience (although I could even logon through the controller VM...

I really don't get this product: why did they release it in the Unifi line (which I associate with prosumer/SMB and not datacentre) instead of Edgemax. Edgemax does have on-board management with HTTP(s). Just remove the display and add a 1Gb management port and use edgemax (if they do not want...

I was surprised that you do not mention the fact that SwitchOS only supports http, not even https. That ssh is missing is ok, but no https is a big issue in my opinion....

Please note that CSS326 does not have the serial port, only the CRS326 has it. Switchos does not support SSH or even https access, it only does http. Management is very limited... That explains the missing serial port

Well I did not need PXE boot so I did the flint -d <device> --allow_rom_change drom dance. Worked great. Thanks for the tip!

Hi all I have a few ConnectX-3s (MCX311) in my network. The one in my PC/workstation (on an Asus H87-pro) seems to be causing some minor issues as the card does not have a EFI bootrom. Looking at the Mellanox documentation I found that the MCX341 DOES have an EFI bootrom. Apart from the...

Yeah, I realized this. In the Epyc Rome reviews Patrick specifies an idle consumption of around 90 - 100W with all sliders up to maximum performance. It would be interesting to see how much the io-die consumes. As one of the reviews suggested it could be most of the total idle consumption... I...