Search results

These notes were very helpful... I spent hours scratching my head why the freaking video on the KVM wouldn't work until this post said that vPro doesn't work headless and it requires a dummy HDMI plug.... ordered one and hope it fixes it. In the meantime enabled the serial console but it only...

I have upgraded my homelab proxmox cluster and selling one of my old nodes. This one has vPro AMT IP KVM. Dual NVME PCIE 3.0 x4 - plus 10gb nic with flex io add on card. HP 800 G6 i5-10500 8GB DDR4 256GB NVME HP 800 G6 + original charger $240 shipped HP 10GBase-T Flex IO 56Q71AA Upgrade...

OK this confirms that chipset locks you down to a specific version of intel AMT. So even if newer software updates or features come out for say AMT v16 (say its meteor lake) that older hw will stay in v14 or whatever track they are on.

I didn't think it would make a difference but holy cow, this is the reason. The only USB port that works with pikvm on this HP 800 G6 is the front right USB port (closest to POWER led). Thank you for the pro tip

I purchased a HP 800 G6 i5-10500 with vPro and have been messing around with it using Meshcentral/Meshcommander and finding a lot of problems getting the remote .iso mount to boot and let me install any OS. Are these issues common and expected? Running latest HP bios and intel ME firmwares v14...

Hey folks; has anyone heard of Unifi issues with SFP+ to RJ45 transceivers where only one direction of traffic is impacted by performance issues? I'm observing poor performance in what seems to be one direction of traffic. My network setup - USW-Enterprise8 with SFP+ to RJ45 to interconnect to...

Are there ways to modify the BIOS or in linux/unraid lower the TDP of my 10500 to the lower tdp of the "T" version?

I'm curious if anyone has done or been successful at upgrading the original CPU of their HP 800 g6 with a different one (either a 65w to 35w swap, or even a newer generation upgrade)? Mine has the 10500 65w CPU and I am curious if I could possibly get a 11500T or another 35w cpu in there to...

I'm late jumping in on the vPro/AMT bandwagon but looks like MeshCommander is abandoned now and the download links lead you to 404s. I was still able to find a download link in reddit somewhere BUT as anything abandoned it is just a matter of time when MeshCommander stops working. Are you guys...

Thanks! I decided to take the risk and buy the 10Gb not knowing if it would do multi-gig. This is me from the future coming back to confirm the NIC does negotiate 2.5Gb to my switch, I don't have any 5Gb port to test other speeds. The downside? On my HP 800 G6 this NIC is not vPro eligible...

I purchased a mini off ebay for my homelab and it came with its BIOS locked. I have tried multiple ways to force reset the password (there is no motherboard pin to set unlike older generations): How to Reset BIOS Password on a HP Laptop (Probook, Elitebook or Pavilion) I also have a CH341a BIOS...

Curious if the 56Q71AA does 2.5GB ethernet too if no 10GB uplink is available? or does it downgrade to 1Gbps

I'm upgrading the homelab and was able to get the following for $650 + tax. 1 x HP 800 G6 i5-10500T, 8GB RAM, 128GB SSD 1 x HP 800 G9 i5-12500T, 16GB RAM, 256GB SSD Did I get a OK deal, GOOD deal, or GREAT deal? A quick searches around ebay it seems like I did get a good deal considering the...

Same boat, don't need them... been thinking about it. I'm wondering if I wait another 6 months or so 4TB drives may come up around this price range.

please report back if firmware changes performance benchmarks.

I purchased a chinese 4 port hotswap chassis from taobao. The backplane that it came with is faulty and makes my linux system unstable (disks directly attached to my motherboard work just fine). I purchased a different backplane and upon eye inspection and see in the photos below; the original...

Kudos to you sir @ElCoyote_ I purchased some Cisco X710-DA2 off ebay that came with a very old firmware and while trying to figure out how to extract the firmware files from the cisco bootable .iso I found out they were partially encrypted. Your notes here came in clutch and finding the...

Do you know if trick works on the X710-DA2 cards to remove restrictions? Editing the magic number in EPROM didn't work for me.

Does anyone have recent experience with X710-DA2 on the latest 9.20 firmware and getting this to work? I've been unsuccessful. root@6600:/home# ip link show enp8s0f1 4: enp8s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000...

Did you ever find a guide? are the x710 being courtefeited?