Search results

  1. A

    Pulling my hair out trying to get Supermicro IPMI to work

    This is how I have mine set. On the BMC configuration page: IPMI LAN Selection: Set to dedicated Update IPMI Lan Configuration: set to yes (if not set it will not save any changes when you reboot) Configuration Address Source: Set to Static if you in put the IP on this page. Set...
  2. A

    E5-2696 v4 22core CPU for $150 or less

    I sent you a PM
  3. A

    E5-2696 v4 22core CPU for $150 or less

    That's easy to implement. I use this on my truienas box and run it in a script at startup
  4. A

    Wanted: Supermicro BKT-0050L-RN Narrow ILM Bracket

    DM sent
  5. A

    Wanted: Supermicro BKT-0050L-RN Narrow ILM Bracket

    How much? Can you post a picture? Thanks
  6. A

    Wanted: Supermicro BKT-0050L-RN Narrow ILM Bracket

    I appreciate you taking a look.
  7. A

    Wanted: Supermicro BKT-0050L-RN Narrow ILM Bracket

    Does anyone have this bracket? Supermicro BKT-0050L-RN
  8. A

    10Gig and Win 11 - ConnectX 2 Driver Issues

    I use a MELLANOX CONNECTX-3 EN CX311A in my Win11 machine and it works well. I believe I had to install the latest drivers from Nvidias site to get it working correctly.
  9. A

    IT Firmware for 9500-8I

    This might help https://www.servethehome.com/flash-lsi-sas-3008-hba-e-g-ibm-m1215-mode/
  10. A

    Inspur-branded LSI9300-8i for $50

    Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA HDD Controller | eBay
  11. A

    Inspur-branded LSI9300-8i for $50

    $16.99 as of this morning
  12. A

    Using Intel Integrated Graphics in Supermicro X11SSL-CF

    I just went down this rabbit hole with my Truenas server. This was helpful QuickSync
  13. A

    Can't get Truenas to boot off USB on UEFI BIOS

    Are you just trying to install it and having problems? If you are using a USB 3.0 port that may be your problem. Try a 2.0 port
  14. A

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Thanks!
  15. A

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Is there a way to have my ICX6450 shutdown when my UPS is low on battery? We just had some storms roll through the other day and it got me thinking. My pfsense box shuts down and I have my freenas box setup to shut down as well. Should I worry about that with my switch? Thanks
  16. A

    FS: SUPERMICRO MBD-X11SBA-LN4F-O pfSense Router

    For Sale SUPERMICRO MBD-X11SBA-LN4F-O G.SKILL 8GB (2 x 4GB) Model F3-10600CL9D-8GBSQ Antec ISK 110 VESA LiteOn LMT-32L3M-HP 32GB 1.8" mSATA $225.00 +Large Flat Rate Shipping
  17. A

    Looking for router advice before moving to AT&T fiber

    No, I have had the service for 2-3 years now
  18. A

    Looking for router advice before moving to AT&T fiber

    I have the 1g ATT service and do not pay $10 for the modem, which I have unplugged on the shelf.
  19. A

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Sorry, I guess my question wasn't very clear how do I avoid using dual mode in my config? Thanks
  20. A

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Could you show how to do this? I am a complete noob at all of this. Here is my vlan config. Port 1/1/1 is switch to pfsense Port 1/1/24 is Ubiquiti WAP with 2 wireless networks. PORT-VLAN 1, Name DEFAULT-VLAN, Priority level0, Spanning tree Off Untagged Ports: (U1/M1) 2 4 6 7 9 10...
Top Bottom