Search results

I got the same intentions however was wondering if it is 12V or 5V fan. As far as i could see it is the 12V one you have installed. By the way i was also able to bring the board to boot correctly. One of the RAM banks was causing an issue even though the memtest+ was running over 2 hours...

By the way here is what i found out Firmware Update for Security Vulnerabilities Associated with AMI MegaRAC Baseboard Management Controller (BMC) Software | Security & Technical Advisory - GIGABYTE Global Do not know how reasonable it is to try updating to the latest firmware

Seems 100W in my case is too much than. I will try another RAM. I feel like CPU is on its max performance because of any reason which would relate to the slow/impossible installation process and the high power draw. The interesting thing is that sometimes - 1 out of 20 power cycle attempts, I...

Check the RAM several times. Cleaned the case beforehand. I will try swapping the PSU today. Could somebody measure the power draw at booting time. I guess when the OS takes over it will strip down the consumption but do you hit 100W with 4 logical cores? What is your bmc/bios/ firmware...

Here is is what i got from MEGARAC

Blue ones

Hello everybody. I was so exited reading the thread and did not last longer till i got one of those boards in hands from the same seller. I do not have much experience with server grade hardware but have been using much older and cheaper set ups for running proxmox/truenas/openmediavault at...