Search results

Could it be the USB drive? Sometimes my usb boot drives get funky from laying too many images on them. Maybe try re-downloading the image, checking the checksum, and applying to a new drive. I've been using USB port 2 on the front. Also, one time I had an issue where the checksums were failing...

Awesome job! I'm gonna have to dust off my 3D printer for this one. Genius!

You need to set the nics to "No ByPass" in the BIOS to make them act like normal nics. Advanced | LAN ByPass Configuration On my box nics are assigned from left to right (looking at the front of the unit). So first nic (PRI) is WAN, second NIC (AUX) is LAN, and so on. Half the issue is...

Nice! I haven't used SecureCRT in like 10 years. Didn't know it was still being maintained. Blast from the past. I've just been using Putty, or shell.

For ESXi USB boot serial console I loosely followed this guide: Installing ESXi over serial console (headless, no video card) | vmware admins In a nutshell, after you create the bootable esxi usb thumb drive, you need to Edit the /boot.cfg From: kernelopt=cdromBoot runweasel To...

Did you download the serial console version of pfsense? You need to download and boot from the serial console version of pfsense. Same with ESXi. I had to modify the USB boot files on the USB drive to boot from serial on ESXi. The UEFI secure boot errors are false (I got them too); just the...

Bummer about the ssd. I wonder if it's something with new ssd format. It sees it, but at a different size, hmmm. I have a couple of different ssds I will test out of curiosity, but they are all older type. Also, I don't remember my CPU getting to 61C. That is kind of toasty for idle. Did you...

FYI, all the NICs work out of the box on ESXI 6.7 if you want a hassle free experience. I know it's EOL soon, but it will still work fine for a lab environment. Or you can prob cp the igb driver from 6.7 to 7. I'll just be using 6.7.

You need a Cisco console cable to connect to the console port over Putty. In Putty, select the Serial option, and specify the serial com port and speed. My serial settings were (COM7 9600) but may be different on your machine. You can get the com port from device manager in Windows. 9600 is the...

The Riverbed CX-770 doesn't seem to be picky on RAM. I was able to install some old non-ecc ddr3 1600 desktop ram into it. Booted and is using it fine.

ESXI Works (version 7U3)! Took a look on my lunch break, and I was able to install ESXI 7 on the box. It complains about the CPU may not be supported in the future, and it didn't like the Intel DH8900CC gigabit network cards (4) (may need to manually install the driver), but the two Intel i210...

Yeah, it SHOULD work. ESXI supports headless, and serial redirection. But I won't know for certain until I play around with it some more this weekend. Maybe somebody else has tried it already on this box...

Finally got a power supply in, and started playing with the box. It's a solid server class box, and for $30 - $40 bucks, I think it's a steal. My two came with the 4 core Xeons, and 4G of ECC RAM (2x2G). I was able to enable hyperthreading and pci passthrough in the BIOS, and installed Proxmox...

Looks like I lucked out. I ordered and received two of them. One came with no drives, and the other came with 2 drives (160G SSD and a 320GB HDD). Both have 4GB of ECC MEM. I plan to up the RAM to 32G and run vmware or proxmox as a firewall/router test mini lab. I don't have the power supplies...

I saw it. You're right, it had a ton of good info in it, like the boot sequence and IPMI pass reset. Looks like there is going to be another flood of these on ebay soon from Cali. I think they said ~$75 - $100 including the power supply.

Agree. This switch is super picky. -Mellanox ConnectX3 with 3M Passive DACs - works -Mellanox ConnectX2 with same exact cables - fail -SolarFlare PCIe 10G with 3M Passive DACs - fail -SolarFlare PCIe 10G with SolarFlare SFP+ Transceivers on both ends over LC Fibre - works -SolarFlare PCIe 10G...

Running OMV3 on mine with a 12 x 3T HDD RAIDZ2 ZFS Pool for regular data, and a 12 x 512G SSD RAID10 BTRFS for VMData. I prefer BTRFS cause it's faster and the COW but RAID56 is still being worked on. My RAID Pools are by 12 cause of the 12x rows in the shelf. Data pool is mainly for Plex, and...

Nice. Thanks for the confirmation. Although the listing has the weight at 93lbs, lol.

Anyone else think this is a scam? Both listings look identical and one seller has 0 feedback.

That happened to me on a node. I had to unplug the node, and clear the cmos (jumper to pin 2-3 close to the battery). Then I turned it on, and the quanta splash screen came up. I unplugged again, and returned the jumped to the regular position (1-2). Boot normal afterwards.