I few weeks ago I got an ICX6610 and with fodeesha's guide set up my network as follows:
ISP - All in One ESXi server - ICX6610 (via two 40GBe connections) - Unifi APs
The ESXi server runs a firewall (now ClearOS, but I tried pfsense), Ubuntu, Solaris for file server.
My issue is this, when I...
This is a bit off the subject as it's really a Solaris question.
I'm running a few ESXi - Solaris - napp-it boxes. I just set up vlans on my networks and they work perfectly. The trouble is, I can't seem to get the vlans to be persistent across reboots.
I've tried making...
I tried flashing an M1215 to the IT mode following:
How to flash a LSI SAS 3008 HBA (e.g. IBM M1215) to IT mode
I find I had to go back and forth between a dos drive and a uefi drive to get anywhere. I was ultimately able to prepare the card and erase the image (steps sas3flash.efi -f...
CABLES were bad
I crossed flashed a few Dell H310s to the IT mode for use in my new solaris ZFS system in a Supermicro 846 with an X9 SM board using the following link:
Updated: SAS HBA crossflashing or flashing to IT mode, Dell Perc H200 and H310
I am testing the first card and...
I'm not sure if this is the right place for this question, but I'll give it a try.
I'm about to remodel my home and as part of the remodel, we are putting in all the smart house stuff you can think of - lighting, alarm, sound, shades, video cams, wifi... I usually do this work myself, but the...
I'm new to the forum, so if this has been covered, apologies.
I'm considering an LSI 9305 24i. Some questions:
Do I flash to IT for ZFS with this card, or is it ok out of the box?
If I want to flash it to the IT mode, are there multiple places I need to add images? Is it like 3 9300 8i's or...