Search results

  1. yu130960

    OmniOS 151022 long term stable

    I needed to do the following: pkg update pkg unset-publisher omnios pkg set-publisher -P --set-property signature-policy=require-signatures -g http://pkg.omniti.com/omnios/r151022/ omnios pkg update reboot
  2. yu130960

    OmniOS 151022 long term stable

    pkg update: The certificate which issued this certificate: /C=US/ST=Maryland/L=Fulton/O=OmniTI Computer Consulting Inc./OU=OmniOS/CN=OmniOS r151022 Release Signing Certificate/emailAddress=omnios-support@omniti.com could not be found. The issuer is: /C=US/ST=Maryland/O=OmniTI Computer Consulting...
  3. yu130960

    OmniOS 151022 long term stable

    What are the exact steps to update from r20 to r22?
  4. yu130960

    NVME Napp-It / OmniOS Pass through in ESXI -- date?

    Done a pkg update. Thanks for the heads up.
  5. yu130960

    SuperMicro Backplane Capacitor

    Just replace the capacitor with the same spec capacitor.
  6. yu130960

    Moving drives from onboard to 9211-8i.

    I will remove the VMs from inventory and remount the drives under their new controller. Thanks
  7. yu130960

    Moving drives from onboard to 9211-8i.

    Looked and couldn't find an answer. If I shut down my host and move all the local data stores to a 9211-8i, will all the drives be recognized and the inventory of VMs which are located on the local datastores work? In other words, are the drives (onboard) identified based on drives or paths?
  8. yu130960

    Please help me decide on what hdd to get for nas storage

    2016 Hard Drive Reliabilty Benchmark Stats
  9. yu130960

    8TB drives for raid - which to get?

    FWIW WDC is the worst manufacturer in the chart for 2016 and in another thread Tom5051's bashed Hitachi as well.
  10. yu130960

    8TB drives for raid - which to get?

    Here is a timely blog article. Right or wrong, I base my decisions on BB blog results 2016 Hard Drive Reliabilty Benchmark Stats
  11. yu130960

    8TB drives for raid - which to get?

    Being from Canada, I saw a deal from dell on the 16tb My Duo enclosures ($609cdn) but I paused given that the reds are not fairing well on the backblaze studies. It seems like Seagates are doing better these days.
  12. yu130960

    Script: Supermicro Host Fan control on on Napp-It (or maybe any Solaris OS?)

    Just saw this and was wondering if anyone got it to work with X11?
  13. yu130960

    Power Consumption SM X8DTH-IF L5639 --> X10SRL-F E526xx v3?

    Am in the process of contemplating upgrading my server to cut down the power bill? I've got 24 spinners spread over 2 ZFS Raidz2 pools , so I am pretty sure that the 400 watts that I am currently drawing has a lot to do with them. Question that I am wrestling with is how much power savings am...
  14. yu130960

    OmniOS now includes LX support (from Joyent/SmartOS)

    Thanks for posting the above. My mistake was setting up the non-lx container (at the bottom of the list). Once I went with the lx-ubuntu-14.04_20150320 everything worked. Is this a restriction as all the lx-XXXXXXXXXXX are older builds (i.e. no ubuntu 16.04 zones)? EDIT: It seems that the...
  15. yu130960

    OmniOS now includes LX support (from Joyent/SmartOS)

    If I was to link a physical nic, should I set it up in Omnios first with IP, routing and DNS and then config it to the zone? Of course this means I would not have to bother with the virtual nic.
  16. yu130960

    OmniOS now includes LX support (from Joyent/SmartOS)

    Can I edit zone.cfg to make changes to the LX zone after creation?
  17. yu130960

    OmniOS now includes LX support (from Joyent/SmartOS)

    Here is what I have done so far 1. Deploy latest OVF napp-it_2017.01_ova_with OmniOS 151020 for_ESXi_5.5u2-6.5 2. General set up of VM (make sure vmxnet3s0 is connected on power on), create pool tank, create file system /tank/zones/, update napp-it 3. pkg install brand/lx 4. chmod -R 700...
  18. yu130960

    OmniOS now includes LX support (from Joyent/SmartOS)

    Does anyone have a walk through or some tips on how to set up the network for the zones? I keep getting the error message that can't use the same device as used by the global zone or something. Is the next version going to make network setup easier?