Search results

Down to $20 again.

Haha, I don't have five cards, yet. But the five brackets are basically the same price as one or two on ebay. So why not have some spares for when I do inevitably buy more cards lol.

Just received these today and they fit perfectly.

Anybody know if the standard low profile LSI brackets will fit these? Also which one of you just bought 70 of these things.. o_O

Down to $22.. After I bought two, naturally :D

I've always been under the assumption the 13th gen rNDCs won't work in the 12th gen servers? Even though the form factor is the same.

Thanks! Looks like the antenna and board layout are different between them, relatively substantial difference. V3 uses a second revision of the IPQ8072 SoC. Whether that means anything in the real world though, who knows. https://fccid.io/A8J-EWS377AP https://fccid.io/A8J-EWS377APV3

Anyone know what the difference is between the EWS377AP HW versions?

Was moving some drives from one SC200 to another and could not get the SATA drives to show back up in the OS. Eventually realized it was because the single EMM was in the bottom slot. Once I moved it to the top slot all the SATA drives started working.

When I plugged the second controller into a chassis at 25% it ramped back up to stock. Also had a couple times where i set 25% and it ramped back up to stock after a few seconds. Still haven't messed with set_temp though. Also when I flashed 1.03 to anything other than the currently active...

Quick tests with a kill-a-watt.. stock fans speed seemed to be around 38%. Idle chassis no drives or drive bays. 2 psus, 1 psu powered, 1 contr, stock = ~34w 2 psus, 1 psu powered, 2 contr, stock = ~43w 2 psus, 2 psu powered, 1 contr, stock = ~49w 2 psus, 2 psu powered, 2 contr, stock = ~57w...

Got a hold of SCOS 7.2.1 which came out in Feb 2017.. it contains v1.03. Looks like the latest SCOS is around 7.4 from what I can gather. Also comparing this to my dump it matches til about half way then my dump looks like its missing a chunk, so yeah, hiccups when it was dumping out to the...

Yeah I just used _flashdump and dumped the image size worth from the region with 1.03 in it. Then used sed and xxd to get it into a bin. The header and a lot of the strings are similar to your 1.01 so I'm not entirely sure why it doesn't work. Also I might have a lead on a 7.01 or 7.02 scso release

Dumped the flash from a v1.03 controller I have but when trying to upload it to another controller it all goes well and seems to work and the _ver output looks good but when you reboot it, _ver just looks corrupted and the region I flashed never goes active. not sure if there's a checksum...

Here is mine from sc200.. 12Pack.Slot0.101.9 >fru_read 2 00000000: 01 0a 19 01 00 00 20 bb 01 09 00 ab - Pastebin.com

Upon first glance that board looks identical to my "Compellent SC2" board.

Hm now I'm interested to open one of mine and see how similar it is.

I have not tried _shutup but set_speed 20 seems to be holding, at least for the last 15 mins or so. The available console commands are slightly different as well. From one of my SC200's.. SC200 - Pastebin.com The SC200 is "12Pack", the SC220 is "FullCase" Below is from an SC200...

Awesome find! Works on my SC200's and SC220. Was literally just about to embark on a fan swapping endeavor on these P/S fans.. but 'set_speed' quiets them down, as long as it holds..

Thank you! Don't know how I missed that lol.