Search results

Could you send it to me aswell? Tnx

Does anybody know the difference between SDFADCMOS-6T40-SF1 and SDFADCMOS-6T40-SS1 :)

Used CPU, currently working in a Dell T630 server. Testing is available via Teamviewer if needed. Accepting reasonable offers as I don't know for what price these go usually.

All sold out?

Forgot to add. I have set the affinity so it spreads evenly across the two cpus. 24 cores are mining (24x2mb =48/50) should I still need to run two separate miners? Thanks

Cold anybody share their config file for xmr stak or xmrig? I am using 2x2660v2 on win s2016, tried both miners. On some nodes I get 1030h, and on some nodes 930h.

A few of us already posted the results in the last few pages. 2 x 2660v2 - 1040h/s @ 185w (bmc)

I was wondering is there a way to have a "golden image" and multiple child volumes in Napp-it? In Windows Server I used to make one complete install of the OS and programs, create 10 child disks and diskless boot 10 different machines of them using ISCSI. If not, is there anything similar? :)

These two are from aliexpress 113e a piece including shipping

2 x 2660v2 all cores enabled 8 x 4gb 1600mhz, 185w according to bmc, 1040 h/s edit - started the miner again, now getting 1060 h/s. Every time I start the miner I get a different result, don't know why

A small package from China has arrived :) nvme adapters and 4 sff-8643 to sff-80877 cables. I will need to order 4 more for the other two cards. I am currently using 2 x Dell H330 in HBA mode and 1 x HP H222, at the moment everything is in single path as I am missing the cables. I plan to add...

Great, I will stay on p20 in that case, as it is 20.0.0.7. Here are the first test with 4 drives in raidz. Will need to wait for the switch to arrive in order to test iscsi and smb.

Multipath finaly working. It turns out that Solaris didn't see the RMS25CB080 raid module, it seems that the drivers are missing. I also found out that it has some bandwith limitations, so will try and skip that one. Curently using 2 x hp h222 flashed to lsi p20, will need to downgrade to p19...

small update, edited the scsi_vhci.conf file and added: scsi-vhci-failover-override = "NETAPP X452_1625500MCSG", "f_sym", "XYZ ABC", "f_sym"; now I can see the drive but with only one path. :)

I followed the second guide, but after using the # mpathadm list LU command, I don't get anything :( On Windows, after adding the mpio feature, I had to add the drive in the mpio settings, and after a reboot, they were working in dual port configuration.

Installed Solaris 11.3 and napp-it. Now to setup multipath, seems a lot easier than on ubuntu -multipath enabled using # stmsboot -e

Installed Ubuntu and started playing, just need to find out how to setup multipath io.

I am in the process of building a storage server with the following components: Intel 2u chassis Intel S2600GL motherboard 2 x E5-2660 128gb ram 18 x 500gb dual port NetApp sm1625 Chelsio T580-CR connected to Cisco 3064 3 x Intel dual port backplane X x Hba's as I would like to avoid using the...

I have a few Dell T630 servers, does anybody know if these will work with QS cpu's?

On of them has an IBM sticker with IBM's FRU, but I didn' have any luck finding anything for now. I have bought a dual sas enclosure, hopefully they will work well with freenas