I have two of these switches i am looking to sell.
I am located in Norway, but will ship worldwide. I am travelling to USA in late october and can bring across the pond.
HPE FlexFabric 5700-32XGT-8XG-2QSFP+ JG898A Switch
32 x RJ45 10GbE ports
8 x SFP+ 10GbE ports
2 x QSFP+ 40GbE ports...
I have a Dell R730xd with 24*2,5" SAS drives in front.
I have seen that Dell sold these machines new in the LFF format with 12*3,5" in front, and optional 4*3,5" in midbay.
Based on my research, i have the avaliable ports on my motherboard to connect this midbay to, and if i need...
Hi. I have the possibility of getting one of these SAN's with 10G networking for very cheap, but i cannot fin any info on supported HDD size except for the OEM info from Dell wich from my understanding only tells what Dell sold them with, and not the maximal supported HDD size.
Does anyone here...
I did a little reading on the subject, and found an article from Microsoft stating that "Failover Clustering automatically recognizes all NICs on nodes that are using the same switch / same subnet - no additional configuration needed."
Since i am running different subnets, then it...
I have a SC200 with the Compellent SC2 controllers.
I have tried to connect to it with a normal FTDI Serial to USB adapter and putty. I set it to 38400-8-n-1 but i get no response.
Also tried with Tera Term VD, no difference.
What software do you guys use to communicate with it? I...
Seems like i am still up the famous creek without a paddle.
The 10G link works sometimes. If i play back a video it will work for some time, but other times it looks like it limits itself to 3.6Mbps.... Very strange.
After the video has "buffered" for a while, it will pop back up to 10G for a...
Well, i did some more tests.
I set up the ip's like Armed Aviator said:
I tried disabling the 1G link to my router, and i maxed out my 10G connection on file transfer speed.
As soon as i enabled the 1G link, all traffic goes down to that speed.
I made an addition in the HOSTS file on my...
I have a link up. Auto-negotiated to 10G.
I checked, and the network card on my workatation is able to be manually set to 1g, 2.5g, 5g and 10g.
On my server i only have 1g and 10g options.
On my workatation jumbo frames is off
On my server it is on with a low number ~1500 (not close to the...
My fileserver is a Dell R730xd running Windows Server 2019 (2x 10GbE & 2x 1GbE QLogic BCM57800 network cards)
My workstation is running Windows 10 (1x 10GbE Aquantia 10G & 1x 1GbE Intel I211 network cards)
Both machines has a normal 1GbE network to my network.
IP's provided by DHCP. They...