Search results

# SX6012 mlxi2c set_fan /MGMT/FAN1 1 35 #SX6036, SX6018 mlxi2c --master-mode set_fan /FAN/FAN 1 65

It also works on SX6036. But it can't work on SN2700.

My card working with intel and aoi brand qsfp even a huawei 10g sfp+ transceiver.

Has anyone got Onyx v3.10.4302 (LTS)?

There is a 32gb innodisk 3ie4 used in windows for new drive speed test. I think onie will format it again while installing the onyx.

Disable csm in bios then boot ONIE 2020.11-5.3.0005 and install X86_64-3.10.4206-installer.bin with new ssd formated in windows the switch is successfully booted with uefi.

How to solve the problem of bracket?

Between sn2700 and sx1012 40g didn't work.

fae mlxi2c set_fan /PS1/FAN 1 30 will slowdown the fan, but the _shell mdbreq one no.

ps fan running at 17984rpmo_O

I think the original psu is also made by Delta. I inserted two Delta DPS-750XB-A in the switche and finally those power supplys can be recognized.

After the SN2700 DC power supply is replaced with a Liteon AC power supply, Power Supply 1/2 is unresponsive. How can I read/modify the i2c/pmbus information of the power supply?

Could you share a link for " X86_64-3.10.4206-installer.bin "?

Those heatpipes are 140mm long 11mm height and 3mm thickness from AliExpress. Small heat sinks are from vintage ATI video card and north bridge chips. I put thermal paste on the heatsink fin’s bottom then use silicon rtv to bonding them together.

Because I don’t have a slim fan. Those two heat pipes pair with 0.1a delta 8020 fan made the temperature 61.7 degree, with a Foxconn 0.16a 8028 fan is 60 degree. Room temperature around 22 degree.

This is my 7250-24

#by usb device# copy disk0 flash spz10114.bin bootrom #by tftp device# copy tftp flash 10.176.220.51 spz10114.bin bootrom

I have the same motherboard. Sadly this board unsupported ipmi oob bios update.

Same bug with bios 3.4 of my x10slm-f, I rolled back to 3.3 bios. From bios release notes " Fixed failure of chipsec items BLE, BWP, and TCO SMI lock. " I think is the broken bios code related with PCH chipset.

In windows I can use two ports. But my card is 25g only eth function.