i plan to replace my 7551p cpu with a more energy efficent and a more single core focused cpu.
So i plan to use a 7282 Epyc2 Cpu. But i am a bit confused with the memory set.
This is a 4 Channel CPU when i know correct. Why does AMD claim that is is 8 Chennel on theri Home Page?
So i resolved the issue. The Card works well. no Problems any more.
I checked the device manager this morning and recognized that there are a few devices that were no more installed.
Probably because i made a bios update before i installed the hyper-v machine.
after reinstalling the drivers of...
i am looking for a compatible RJ45 Tranceiver with 1G/2,5G/5G and 10G support. Has anyone tested this yet and can recomend a module?
Otherwise i would order the ordinary Fiberstore . com module with brocade compatibility. thanks
the i350 with two cables and the mellanox are hocked to a brocade icx6610.
I had this running with one cable on the i350 for WOL usage and the mellanox for fast connection.
This worked and had no issues. Should i use a sort of link aggregation here? I thought this is not necessary cause i dont...
No i dont need it. It was disabled in BIOS and i enabled it to test if it works then. But didnt solve the issue.
It was enabled in the Virtual Switch i created. So i erased it and created a new one. but this didnt help.
This is so strange. Getting an ip but no connection to internet etc.
my MellanoX ConnectX-3 worked well the last Months. But last month i installed a HyperV Machine with an external Switch connected to one of my four Intel i350 Nics.
Since then my Mellanox 40G connection doesnt work any more.
The Server reports a IP Adresse. But i cant ping it,
As soon as i set the nvdia card as primary the IPMI video card will no longer work for KVM. I just get a Black screen.
My Resolution was to buy a used KVM console for my rack and a 4k HDMI Dongle so that steam can stream up to 4k.
I use a supermicro h11ssl-nc with a epyc 7551p.
I also own a 2070rtx. I dort have keyboard, Mousse and Monitor connected. Everything runs over the aspeed bmc Chipset. Normally i dont use a graphic card.
Biut my plan is to set up a steam stream Client with this Server.
I have two options...
Hello all together,
I am using a brocade icx6610 24p directly behind my modem. A Fritzbox 6591.
Every device is connected to the brocade.
My problem is that in my setup I get asynchronous audio streams over time in my different zones.
I never had this issue before. It started when i starter...
i own a 6610-24 and i want to buy a new access point. I tend to go for AX or wifi6. But these devies have 2,5gbit oder 5gbit network.
Is it possible to use a RJ45 Tranceiver to a SFP+ Port of the brocade and get the full speed to the AP?
For example: Cisco SFP-10G-T-S 10G SFP+ Modul...
i want to sell my Server System. Want to get smaller with an Ryzen Asrockrack or intel scalable with less power consumption.
Pictures on demand.
Here is whats for sale:
Total Serverwith cables: 2200€
AMD EPYC 3551P • Kerne: 32 • Threads: 64 • Basistakt: 2.00GHz • Turbotakt: 3.00GHz
i am lokking for an Lenovo 430-16i to use with an Asrockrack X470D4U. Do these cards work in non Lenovo Setups?
How about drivers? can the broadcom ones be used?
And has anyone flashed a HBA like this? Or only raid cards?
Thanks for the help!
Yes. It really would be!
right now i use a combination of two x8 cables and the supermicrop riser.
But this hast some problems. Sometimes one or both of the two cards is/are not present at start up.
Right now i am using a 90w picoPSU with a
M11SDV-8CT-LN4F with 32GB Ram, intel optane 480gb...
i bought a sun oracle F320 3.2TB NVME PCIe Drive. Sadly my windows server doesnt start the drive.
It has code 10. The device cant be started. It is not available.
Any idea how to fix this? or do i have a damaged drive?
Ok this seems to have worked. I uses mighty fohdeesha's example.
Card is set to ethernet mode as well. I use the WinOF 5.50.51 drivers. But there is now WakeOnLan option.
When i read right 5.50.51 does not support WOL.
I tried to use the 5.35 with the latest firmware. but this does not seem to...