What setup questions do you have? From what I've been reading, Patrick's "DeepLearning" systems would be the ideal RNDR builds, but lesser systems including riser/1x PCIe should still be able to do work.
* Starred my feedback, we have about 20 VRTX systems that are managed.
- Is there any benefit to having 2x (vs 1x) CMC cards other than redundancy?
- If I'm asking an ebay seller about CMC licensing, what questions should I be asking? Is CMC licensing different from iDRAC licensing...
I asked a supplier if the Supermicro PSUs were compatible with the widely available HP breakout boards and they said they were not.
Unless you were saying to just buy an HP PSU and breakout board, which yeah if I can't get it going with the Supermicro's I will probably go that route.
Wow, serious thanks for taking the time to write that up.
My intended use is in a new 8 GPU box i ordered that will require 10 PCIe 6 or 8 pins.
2x 6 pins to power the motherboard
8x 6 or 8 pins to power the 8 GPUs, depending on if I put in GTX 1060's or GTX 1070ti's
I'm thinking the 2...
Anybody done anymore digging on this? I have a pair of PWS-902-1R PSU left over from a 4u build that could be used for GPUs if it had a proper breakout board. The PDB-PT846-8824 breakout board just has a 24 pin and 2x 8 pin EPS plugs with a bunch of 4 pin molex.