This was it. Thanks!
I only had uid=1000.
I added gid=1000 and after a reboot it shows correctly.
So, the "credentials=/path/file" of the cifs mount in fstab is strictly for gaining access to the share files. Once mounted, they show according to the "uid=####,gid=####" parameters in fstab.
Thanks, but the problem is with the SMB share, not the NFS. I mentioned the NFS parenthetically only because it had similar issue, which is now resolved.
Let me reiterate for clarity:
Users: myusername - UID 1000
Groups: myusername - GID 1000
SMB share of MyDataset
I have setup a SMB share (and a NFS share too) in Truenas 12.0-U8. Shout-out to David McKone's detailed guide(s for both) on youtube:
The user name and primary group on both TrueNAS and my Ubuntu Desktop are the same: myusername:myusername.
When I setup the ACL for the dataset I applied the...
I got the High Point RocketU 1344A and am using that for USB passthrough on the X11DPG-QT for a Sworkstation / HEWS (High End Workstation - I made this one up). I upgraded to ESXi 7 and was able to passthrough the "Intel Corporation Lewisberg SATA AHCI Controller" but the onboard USB never...
(I have posted updates to most of the Qs above)
I am not able to establish a connection through the switch.
Reading online it seems that Arista switches should not require any configuration to establish a basic connection. As long as the "cables" are compatible, it should be just plug-n-play -...
So I got a 7050QX-32 (non S), used, and want to test it before the return window closes.
Below is a list of the various issues, comments, questions that I have. The two main ones are some stability problems - reboots - and (perhaps related) out of storage space.
I don't have experience with CLI...
Would Arista 7050QX-32 boot/run without any of the factory fans connected?
I plan to use only a few ports with DACs for a homelab setup. It should consume approx. 100W-120W with one PSU - link. I would put 4x 14mm or bigger fans with the cover off to dissipate the heat, while being much quieter...
Couldn't afford the $600-$800+ for a complete 7050qx-32 so I bought a "water damage" unit that came without any power supply or fans.
Is there a budget alternative for the power supply?
I see that the S-version ( 500W - PWR-500AC-F ) power supply is cheaper than the non-S ( 460W - PWR-460AC-F...
Thanks for the advice, kapone! This helped. I should have RTFM instead of poking around things I don't understand well.
So, I did not have to repeat the whole procedure again. Just add the new zvol (extent) to the same target (a new line under Associated Targets - leave LUN blank - it should...
Wasted several hours trying to establish a second iSCSI connection from the same ESXi host to a new ZVOL (zvol2) hosted by the same FreeNAS server for my homelab.
The Authentication method is Mutual CHAP which works fine for the first ZVOL (zvol1).
On Freenas I did:
- create zvol2
asked Supermicro; they said they do not know - have never tested such a setup - but in general they think one card should NOT affect the speed of another even if they are plugged in the same slot (using bifurcation and passive slot splitters)
Found this PCIe 2.0 x8 card:
IOI Technology Corp.
model - U3X8-PCIE8XE104
Octad Channel 8-port USB 3.0 to PCI Express x8 Gen 2 Host Card | U3X8-PCIE8XE104
but it is not sold directly from the manufacturer or anywhere on the interwebs.
(I have contacted them before about another product and...
Does anyone know if the bifurcation specification requires that all the bifurcated channels must have independent timing? That is, if I bifurcate a x16 Gen 3.0 slot into x4x4x4x4 and then plug three Gen3 and one Gen2 cards, will all four cards operate at Gen2 speeds?
Aghhh...... figured it out!
From what you said, I started researching and in a vmware document they were talking about pci passthrough and pci ids and then it clicked:
I am blindly putting settings such as
as recommended online for nVidia passthrough
Finally was able to achieve a stable passthrough with an old nVidia 8400GS
However, there are no audio playback devices showing.
Device Manager->Sound, video....->NVIDIA Virtual Audio Device (Wave Extensible) (WDM)
Device Manager->System devices->High...
These came out in 2016. I have taken them out and inside is a WD80EZZX drive, which in fact is a HGST drive. Here are links for them on newegg.com and amazon.com
I have 7 of them - never used - and want to put them in a 40TB RAID-6 type of setup using some cheap-ish RAID card (limited budget)...
Nothing so far. I am waiting on a High Point RocketU 1344A but that might take a while.
Meanwhile I installed Windows 10 directly and am using the computer as a desktop with a AMD Radeon RX480 connected to a 4K TV.
Is there a way to disable the "onboard" IPMI VGA?
When I disable it in Windows...