Search results

I am trying to find the NMLXCLI vib file. I need to use this cli tool to set spoof checking off and trust on in vmware. This needs to be done in order for VLANs, SRIOV and ESX to live happily ever after! If I use PCI-PT instead of SRIOV, it works. Unfortunately, I need to use SRIOV and need to...

the are a few variants of the cx-7 nics. there are the nics that use an osfp connector (physically larger than the qsfpxxx counterpart) and some that are dual port qsfp112. the dual port cx-7 nics that are qsfp112 work with a cheap qsfp56 dac if you are just connecting the 2 ports b2b (back to...

see the other cx-7 threads. next stop cisco 32x800GE in 1U! (just need to find the damn breakout cables! at least until they come out with the cx-8!)

STH just posted an article on these nic cards. I am trying to get some clarification on the specific cable to connect a QSFP-DD switch to one of the OSFP cx-7 nics. There are 2 issues that we encountered: 1. the nic side requires an OSFP "Flat top" connector not the "Fin top" that is normally...

I still can't quite tell if either of these boards might work. I do see Microcode of A0 for both but not sure of the rest of the version info. The AGESA on the tyan also looks to be newer which may not be better if we are trying to get an ES chip to post.

All sold! Thanks for everyone that purchased! Next round......I will list some more interesting items ;)

[]========================<< Official Released >>===========================[] V1.02 - Date : 03/06/2023 - Filename : 8050020102.ROM - Banner : TYAN S8050 BIOS V1.02 - CheckSum : F3E5 - Recovery : 8050_001.CAP - AGESA...

SUBJECT: MZ33-AR0 BIOS Release Notes version F05 System: MZ33-AR0-000 About This Release Build Date: 2022/12/06 BIOS Checksum: 0xC2114F5D (32M) Release Owner: Iris.Chang BIOS Components/Contents Processor stepping(s) supported: AMD Genoa Processors System hardware configurations supported...

updated some items

updated

Unfortunately, the cards were just sold as part of a bundle deal. I will update the listing accordingly. I will pm you on the details of the nics as they are also just being sold with some of the related servers. thanks, jp

I want to sell the cerberus x as a complete system. pm me to discuss how to pair down a bit

Updated with new items and some items that were just sold.

does anyone know the correct syntax for adjusting the fans using ipmiutil for the newer bmc 2600 boards? I found some notes on ipmitool on the newer bmc: Cipher Suite 3 is disabled by default since BMC firmware 1.90 and only keep Cipher Suite 17 opened by default. Due to this, the extra...

bump for lots of pics and a few new items!

the dac cables that I was referring to with the "flat top" on both sides:

Correct. If you look at the block diagram, you will see 32GTs between the two sockets. That is pci 5.0 speeds.

and this is the sp5 version:

not the prettiest cooler but.....

I had dynatron build a sp5 and lga4677 water cooler using 2x120 fans and rad. very quiet and effective! similar to what Patrick wrote about except he tested the 1u stock cooler which was not very quite. I also have 1u and 2u systems (genoa and spr) plus motherboards although the mb are...