Search results

As @ms264556 stated. iOS devices have a history of issues with mixed wpa2/wpa3 wlans and Ruckus specifically stated that in firmware releases under known issues. At some point, that statement fell off the list of known issues, but I never saw it listed as fixed. Initially, neither Fast...

Are you with Linus tech talks? :) I have three (2 r650 and 1 r750) and have waffled between turning off 2.4Ghz radio on the middle AP, and a 2.4Ghz two-channel (1,6) re-use plan with all 3 to give room for an IoT thread network.

RUCKUS Unleashed 200.14 Release Notes New Features • GUI support to configure the following parameters OFDM-Only, BSS-Minrate, and Mgmt Tx Rate. • Multi-language support for Guest WLAN portal • Supports more number of WLANs and AP groups for Dedicated Master • ICX Rodan switch management •...

Awesome stuff @ms264556. I am sure you will, but please let us know when your improved home assistant integration is ready.

Weirdly I had something similar when my area had major power outages from an ice storm that took power out for hours, exhausted the UPS and then proceeded to flicker on and off for several more hours. Although I still had a switch that seemed to function correctly, I could neither SSH into it or...

For anyone using the 09.* firmware, I am dropping this here in case anyone runs into this edge case. I run a proxmox cluster that host multiple IoT vm's and containers (Homebrige, HA, Scrypted) among other things attached to my 7150-48zp. Ever since booting the fastiron 09. series ipv4 mDNS has...

@dswartz As you might be aware Ruckus does not recommend this new 09.* firmware for anything that I know of yet. Certainly not the 7150 or the 7250. Had major bugs earlier and still proving itself over time. If you are leery, 08.0.95 is a good choice. The config file format has slightly changed...

Don’t have this specific model, but from what I remember, in terms of licensing the 10G capability they are both turned on or off together. In terms of physically using the ports they are independent of each other and both can be used separately.

@ciree8 Can the computer you are plugging in set either vlan10 or vlan20 on its port natively? if not make switch port 1/1/3 untagged vlan20. The posted start-config from the 6450 is not showing any dual-mode ports, but I suspect you are doing that in the running-config only. From a brief...

FYI @kpfleming, @gseeley & @tubs-ffm RUCKUS ICX FastIron 09.0.10e (GA) Software Release (.zip) and RUCKUS ICX FastIron 09.0.10e (GA) Release Notes Published or Updated on 02/10/23

You are looking for dual-mode. Doable from the web-gui, but if memory serves convoluted and not intuitive. https://docs.commscope.com/bundle/fastiron-08030-commandref/page/GUID-17D8F974-26A7-47D5-949F-4F9F9BC31913.html

FYI Ruckus running forward on ICX release versions. Now has a 10.0.00 release. Only runs on ICX 7550, 7560 and 7850 Series. obviously not recommended, although doubt many have one of the supported switch series.

Try this post: https://forums.servethehome.com/index.php?threads/brocade-icx-series-cheap-powerful-10gbe-40gbe-switching.21107/post-345446 PIM Dense

Available for all supported models as of today. https://support.ruckuswireless.com/software

Posting your switch config as @Craig Curtin suggested will allow for better advice. For endpoint devices that do not natively support vlans (most things other than a computer or enterprise switch/router/AP) that plug into the switch you will need that switch port to be untagged in whatever vlan...

No I also found smart-roam to be more of a bull in a china shop than I needed. I enabled 802.11r on wpa3 SSID, 802.11k is not available on wpa3 SSID in 200.12.*. I have both 802.11r and K enabled on a separate wpa2 SSID. I have all AP set to AUTO on TX power. I specifically assign both 2.4...

RUCKUS Unleashed AP 200.13 (GA) starting to hit their servers for R850 model APs. I'll sit back and watch for a bit, although I have r750 and nothing released there as far as I can tell anyway. https://support.ruckuswireless.com/software/3524-ruckus-unleashed-ap-200-13-ga-software-for-r850

Wow, I thought I had some overkill with 2 r650 and a single r750 in a similar size home, but you win. :) Also experiencing good handoffs on all modern devices (almost 100% apple iOS here). Only some older Leviton "smarthome" wifi switches do not play nicely, but they are the problem. Are all...

Roaming depends on the clients having well-functioning roaming implementations as much as the AP's. Smart Roam however has no Client dependency and the AP simply cuts off a client and refuses to allow reconnection if below a specified connection strength. The client has no forewarning or list...

Interesting sniped an r750 for pretty cheap in dec of 21. Hard to believe they are now going for 3x what I paid for one used on eBay back then. I'll have to experiment with 200.13 after the initial release dust settles.