Search results

Thanks that helps! I am going to be building an Infiniband network for storage, and that is good to know.

I am looking at a couple of different SX1710 switches on Ebay. Is there only one version of this switch? I see at least 3 different names for this product listing SX1710 SX1710 IB SwitchX-2 SX1710 MSX1710-BS2F2 SX1710 MSX1700-BS1F2 Details on the differences are hard to come by, if someone...

When I spoke about using your storage under a different VLAN, I should have stated that is if you had other devices that would be dedicated to talking to that storage. For your normal access to the storage server, you would use a different VLAN to communicate to it. I tend to forget that most...

Do you have a router that is routing already? If no external router, then using the switch as a router, does have some limitations in what routing it does. Setting jumbo still allows you on a per-port or VLAN basis the MTU I would segment storage from other VLANs i.e. internal network on one...

Hi everyone, I am looking to get an SFP+ switch to bring over into my new home office space. This would be basically for connecting desktops and other devices. I have 10 gig ethernet machines and some that could be used with SFP but not required. Used is fine, as the switch will be connected...

I use LINUX for all my work, putty is available, but not as clean as the windows version. I just open a terminal and ssh into the Pi and run picocom to connect to the serial port and work from there (i.e. picocom -b 115200 /dev/ttyUSB24). The Pi is connected to the 15X USB to serial cables...

Only if I had a console server or connection manager. That would make my life easier 15 console cables connected to a raspberry pi are a mess. (any recommendations?)

Just for constancy, all of my hardware runs at 115200, and I hate the slow interface as well. It is not the end of the world. Also, it is one of those, I want it to work this way why can't it kind of thinking.

Nothing here that seems to make you think you can change the rate This is why I am confused, I tried this with expecting it to be similar to what the 7xxx versions did. Thinking like you, I tried it just in case it was hidden. Strange how, nothing points to baud rate being able to be...

have just picked up a couple of icx6610s and I am trying to get the console serial port set to 115200, and what I did for the 6650 does not work. Setting this in the u-boot on the 6650 I used On the 6610s there is nothing. I read that others just used buadrate, as they are not u-boot Where...

To understand your statement correctly, the 32/48/56 is the number of aggregate ports or SFP+ ports only? The following description is what is confusing me: The description says 48 in it be but s described as having 56 ports. Thanks again. Licensing, I get it now! Thanks, I had to read better!

Hi all, I am looking at buying one of the ICX6650 could someone help me understand the differences in the module numbers I am finding on eBay Physically these look the same, but the prices range from 690.00 to 900.00 dollars The 32-I-ADV is at the lowest and the 56E-ADV is at the highest. I...

Hello all, I am looking at replacing a failing Broadcom 9361-16i with a Dell 9460-16i. My main concern is related to what differences are there in the firmware, outside of having to get firmware updates from Dell. The item I am looking to purchase is used from eBay. I don't want to purchase and...

Thanks I will check this out as well!

I presently have an LB8M that is working great for me so far. Some minor issues, but still good. I am looking to purchase something nearer to 400 US dollars. Should support L2 functions, needs no routing, standard SFP+, or better. Could someone recommend a device that could do what this does? I...

I did a search this weekend and today for the same, but nothing that does (4u) 15+ drives under 400 and would fit this MB. I would like to be able to keep this in a rack, but if I can save money, I have no issue with going to a tower type, but it needs to be able to fit 9 drives ( I am using Icy...

Thanks, everyone for helping me out here, I ended up going down a rabbit hole with this one. Now after understanding this MB size and all I am on the lookout for a 4u chassis that will support this. I have spent some time on e-Bay looking for something but before I pull the trigger on a $500+...

The pins in the socket were bent on arrival as I had only remove the heat sink from the MB. I had not even noticed them being bent until after having pulled the CPU off. I am waiting now for the eBay seller to get back with me to do a swap. I had not done a close inspection of the board before...

OK So bent CPU pins - I got it to post for a few seconds and it gave a b7 error code, but from what I saw online it still meant that the CPU was not going to post. I pulled the CPU again put it back in and nothing. From what I see then I should be able to get this to work with all that I have...

I am accustomed to using chassis by the motherboard manufactures, with the PSU. The thing is I have another PSU rated at 1600 and a full 4U chassis for this all set in place. So I figured this should not be much of a problem. I have built systems from the ground up many a time, chassis, CPU...