Search results

  1. S

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Mind sharing your switch config? Love to see how all this is configured. Thanks
  2. S

    Brocade ICX6610 10G network different VLANs

    Correct the connection from my firewall to my ICx6610 is on port 1/3/1 and i have that port tagged on every single VLAN, I also tried to add a 10G card to my firewall (untangle) and i can only get about 4.9G of speed (better than the 900 i was getting before)
  3. S

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    How do you control, which routing PFSense handles vs which VLANs traffic gets handled by your switch?
  4. S

    Brocade ICX6610 10G network different VLANs

    Hello all, I'm trying to troubleshoot a 10g network issue running as 1G. So I have 2 machines connected to the front 10G of my licensed icx6610, when I do show int brief, both interfaces show 10g, both machines show their connection as 10g, but when I run iperf3 I only get 1G speeds. Both...
  5. S

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    I have the revision A. "your Tripp Lite UPS outputs a modified sinewave" is there anything I can do about it? Or basically get another UPS?
  6. S

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    I have a ICX6610 48p PoE i have it connected to a Tripp Lite SMART1500LCD UPS, and every time the power goes out or even flickers the switch will go off, nothing else that is connected to the UPS turns off, only the switch, i have tried 1 PSU at the time, tried both connected to UPS, took one...
  7. S

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Does stacking only work with certain port? Certain cable? I have two 6610 want to use the 10g for stacking
  8. S

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    To stack or not to stack.... I currently have 2 icx 6610, why i should configure them as stack vs not configuring anything after plugin media between the 2
  9. S

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Any recommendation on network cards? Was thinking to get these: 0N20KJ DELL BROADCOM 57810 10GB DUAL PORT PCI-E SFP+ NETWORK CARD N20KJ Y40PH | eBay
  10. S

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Which sfp+ Cable you recommended for the Brocade ICX6450? I need about 3ft of cabling also which nic? Also is the OP still providing free licenses? I need to unlock the 10 g ports on the icx6450 if i end up getting one… last question;) are there any switches with more than 4 10g ports that is...
  11. S

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    New around here, just got a 6610, what cable i need to connect to the console of this thing? Regular USB to RJ45 serial? or special cable? Something like this? https://www.amazon.com/gp/product/B0814FV13F USB-c to work with mac without adapter