I've opened the top cover and installed this on top of it, works pretty well.
AC Inifinity Cloudplate T2 - 1U
Current Rack temperature is around 33-35 deg-C
The stack unit 1 chassis info:
Power supply 1 (AC - PoE) present, status ok
Model Number: 23-0000142-02
Serial Number...
Anyone tried this yet for the firmware upgrades?
Please may try update IPMI using web GUI and uncheck all the boxes where says “ save BMC configurations and all that “
If didn’t help, please may try to move the JPME2 jumper to pin 2-3 then apply the updates and see if that helps ?
I've recommended the use of local SSD for booting ESXi for years now, because of mainly K.I.S.S.
For Prod = Dual SSD on B.O.S.S (Boot Optimized Server Storage)
Recommend Size = 200GB+ or more = more chance of being "Future Proof"
All Self-Contained, easier troubleshooting for when murphy shows...
Looking for
1 x Supermicro 6028U-TR4T+ Barebones with rail kit
2 x Intel Xeon 2683 v4 (ideally) or v2650/2680/2690 must be v4's
8 x SAMSUNG M393A4K40BB1-CRC0Q 32GB 2400MHZ ECC SERVER Memory DDR4
1 x SUPERMICRO RSC-R2UW-4E8 RISER CARD
2-3 x SuperMicro BPN-SAS3-826EL1-N4 SAS3 and NVMe U2...
Is it possible to configure interface management 1 with its own routing table on a ICX 6610, playing with VRF but looks like that int management 1 wont work, no VRF Forwarding options?
I'm looking at possibly of having a backdoor in case of emergency, workaround is using a jumpbox in that mgmt...
Hello, setting up an ICX 6610 using the out of band management port with a specific subnet (not managed by the ICX), trying to find how to setup a default gateway for the OOB only, I'm guessing I have to use a VRF or something else?
Running ESXi 7.0 U1 between 2 VM with a VyOS Router between them and x540-AT2 10GB nics, my servers are also the same as this 1U, running sys-6028u-tr4+, might pick one of theses U1 for FW/Routing purpose also running ESXi.
[root@iperf02 ~]# iperf3 -c x.x.x.x
Connecting to host 10.0.1.185...
Trying to find a PCIe adapter is hard for these... any1 with luck?
Maybe this but might be too thick?
PEXM3-152 PCIe 3.0 x4 Host Adapter for NGSFF NF1 M.3 NVMe 110mm SSD
o Supports 4.8mm thickness M.3 SSD
That version of the P4511 looks like this
Type
Width
Thickness
E1.S 5.9mm
31.5mm
5.9mm
I've found these, offered 55$each for 4, those are 25GB and should work with ESXi 7.0.
I should get mine soon
BCM57404 NetXtreme-E Ethernet Virtual Function - ESXi 7.0 HCL
Dell 4GMN7 BROADCOM 57404 25GBE DUAL SFP PORT NIC ADAPTER - QTY Avail - FastShip
From what I can understand the 4 x 40GB port on the back, 2 of them could be used for servers @40GB but the 2 other ports are 40GB but breakout to 4 10GB? No way to connect those to servers @ 40GB?
Sorry my math was wrong
E5-2683 V4 for $174.50 USD but part of a complete system except RAM, still looking for around 70$ per 32 DDR4.
Quote:
SKU: G-2U-X10DRU-i+-12BLS3-3xPCIeGPUx162U 12 Bay X10DRU-i+ Supermicro Server 2U 12 BayX10DRU-i 6028U-SAS3 2x E5-2683 V4 No RAM AOC-S3008L-8LE Full...
I know here's my calculation from what I could gather:
Supermicro 6028U (SAS3) is 349$ at the TheServeStore
2x Intel Xeon E5-2683 V4 2.1Ghz 16 Cores 120W @ 349$ for the pair or 149.50$ each, couldn't find anything close to this except for ES from China, looks like a good deal.
AOC-S3008L-8Le @...
Found a seller that ships to Canada, how does this system sound 899$?
System Model: Supermicro 6028U (SAS3)
Chassis: CSE-829UAC-R1K02-T
Motherboard: Supermicro X10DRU-i+
Backplane: BPN-SAS3-826EL1 Expander backplane 12GB/s
CPU: 2x E5-2683 V4 2.1Ghz 16 Cores 120W
RAM: NONE
Hard Drives: None...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.