Search results

So is one 4U chassis still for sale or sold?

Hello, Resurrecting this old thread, I solved PCIe (Video Card) mystery at least on v3 DDR3 board but I have a question: BIOS is slow to render, changing pages, loading text takes time, navigation in general, isn't instant Changing subjects seems to be okay speed when nothing is to load on...

Would you sell 2678v3 separately? Interested in buying one if price is low

They don't mention 1.35v speeds (motherboard manuals if I understand it correctly note max speed of 1333 mhz for PC3L/1.35v DIMMs) Oh, I just noticed this is a ES Xeon Discussion board, not General Xeon Discussion

Hey, a quick question: Can E5 v1-v2 run 1600MHz 1.35v RDIMMs at full speed?

Hi, I've never used these. Are these a standard SSDs? I.e. will they show up in the file explorer as a drive? Will be able to install an OS (Windows) on it? Because this seems pretty interesting thing...

CPUs get to 70 degrees within 10 minutes of 100% load, I meant they get higher shortly after. I see a lot of jumpers on the midpane, maybe they need to be set differently?

Well, one board died on me while not worrying so. By the way manual of a standard commercial Quanta systems had max 130 TDP, while Windmill V2 is 115. So that might be the thing you saw.

CPUs run at 70 degree Celsius just after ten minutes of 100% load (unless ambient temperature is 15 degrees); heatsinks get hot, and the pulled air is really warm too, but fans operate at the lowest speeds (slightly faster when system gets heated), I know this, because once I pulled out one fan...

Hi, Can anybody help me with the backplane fans? My fans never reach its full speed despite CPUs overheating while barely being under full load. I see some jumpers on the backplane, some even mention fans... There should be a way to make fans more agressive, or to set on manual control... Does...

Hi, Can anybody help me with the backplane fans? My fans never reach its full speed despite CPUs overheating while barely being under full load. I see some jumpers on the backplane, some even mention fans... There should be a way to make fans more agressive, or to set on manual control... Does...

This is for your Quanta: QUANTA PCIE RAISER CARD FOR QUANTA WINDMILL SYSTEM | eBay SLI-ing is not something I'd recommend, it's being massively dropped out in modern games, now true multi-GPUs are used in modern APIs (ashes of the singularity is an example) But you'd better forget Windows 10...

You can Google and find an answer within seconds. DIMMs per CPU; I do believe you can mismatch but probably you'll loose quad channel; pairs on quad channel makes no sense. You could literary find an answer on Google within seconds. I use motherboard's FDD power to molex and handmade molex to...

Yes, it does support 1 CPU config, I think it does support anything in if it's PCIe x16 slot as long as card gets enough power, and I really doubt this PCIe slot provides full power as it should and as it does on desktop; Windmill does support Win 7, I think 8 and 8.1 too (some other open...

DDR 3 - some sellers agree to 30$ on 8x4GB Windmill has 1 x16 PCIe slot 2 USB 2.0, 2 SATA, turn on/off button, restart button. Check out "Quanta Open..... Deal" in Deals category on the forum. About Adobe - do your own Googling mate It's either Premiere or AE as I recall, or both in some...

Eight memory channels, what a beast!

Hi Twice_Shy, I think you misunderstood what K D meant to say; it's that you should know what exactly you may need. Thing is with server/cheap hardware you get to sacrifice a lot, and some features so to say give certain benefits to certain applications. For example, application that can...

Or you can one of these for 60$ and install two LGA2011 CPUs.. QUANTA WINDMILL SYSTEM BOARD V1 WITH 10GbE ETHERNET HEATSINK | eBay (they say it's Windmill V1, which is dual LGA1366, but I contacted seller and says it's LGA2011, making it a Windmill V2) And figure out about the power...

To be honest since the release of Ryzen I think there are really few options that makes sense to consider: The cheaper route: First gen Core i era dual Xeon build (i.e. i7-980 - Xeon 5600 series) (These costs include shipping) CPU: 2x 4 core 8 thread = 2x$6 Motherboard: $40-$50 X8DTU or...

By the way checked and tried out and AEON calculations seem to be more precise than they are for other coins. Should have had miner around ~0.1 coin and actually have mined slightly more than .09 or more (some more may mature)