The firmware is brain dead. I neutralized the pwm cable to have the fans running at 100%. Hmartin made a mod to control his fan manually with a little pwm controller that you can find online for a few bucks.
My cpus are v1.
Envoyé de mon SM-A320FL en utilisant Tapatalk
With no option at all. The hash rate is swinging between 2.6 and 2.9k. Do you know why it is swinging?
-v 2 => 2.9k stable
-v 2 --doublehash-thread-mask 0xF0F => 2.5K stable
-v 2 --doublehash-thread-mask 0x707 => 2.4 stable
Actual xmr-stak => +3K (AES-NI, Hugepages, no...
At least I found a solution to have the fans at 100%. I neutralized the PWM cable on one CPU Fan. The board detects it as failed and it delivers 100%. Lol.
I also found these raw ipmi queries, but I cannot see what they do.
ipmi-raw 0x00 0x30 0x30 0x00 0x00
ipmi-raw 0x00 0x30 0x31 0x00
I already tried to update the ME using their tool but it aborted: ME Update Read Data from ff000000 Not Match Retry.
I aborted the stress test at 78C. Throttling is not an option. I need heavy load 24/7. Intel specs give a limit of 73C.
I swapped the heatsinks with noctua ones and quiet fans...
I found this technical manual and it mentions an FSC Image Update procedure (page 203).
Could somebody share the flashtool and the files if any?
There is also a note about flash recovering the ME...
I have the BIOS ver F03C3A07 and I don't see any options to control the fans (profile).
The CPU fans are not ramping up when the CPU temp is higher.
I already tried to change the fans and Px Therm Margin threshold through dcmi but it does not change anything.
It triggers an event but...