Search results

I needed to do the following: pkg update pkg unset-publisher omnios pkg set-publisher -P --set-property signature-policy=require-signatures -g http://pkg.omniti.com/omnios/r151022/ omnios pkg update reboot

pkg update: The certificate which issued this certificate: /C=US/ST=Maryland/L=Fulton/O=OmniTI Computer Consulting Inc./OU=OmniOS/CN=OmniOS r151022 Release Signing Certificate/emailAddress=omnios-support@omniti.com could not be found. The issuer is: /C=US/ST=Maryland/O=OmniTI Computer Consulting...

What are the exact steps to update from r20 to r22?

Done a pkg update. Thanks for the heads up.

Just replace the capacitor with the same spec capacitor.

I will remove the VMs from inventory and remount the drives under their new controller. Thanks

Looked and couldn't find an answer. If I shut down my host and move all the local data stores to a 9211-8i, will all the drives be recognized and the inventory of VMs which are located on the local datastores work? In other words, are the drives (onboard) identified based on drives or paths?

Beta?

^^^This

2016 Hard Drive Reliabilty Benchmark Stats

FWIW WDC is the worst manufacturer in the chart for 2016 and in another thread Tom5051's bashed Hitachi as well.

Here is a timely blog article. Right or wrong, I base my decisions on BB blog results 2016 Hard Drive Reliabilty Benchmark Stats

Being from Canada, I saw a deal from dell on the 16tb My Duo enclosures ($609cdn) but I paused given that the reds are not fairing well on the backblaze studies. It seems like Seagates are doing better these days.

Just saw this and was wondering if anyone got it to work with X11?

Am in the process of contemplating upgrading my server to cut down the power bill? I've got 24 spinners spread over 2 ZFS Raidz2 pools , so I am pretty sure that the 400 watts that I am currently drawing has a lot to do with them. Question that I am wrestling with is how much power savings am...

Thanks for posting the above. My mistake was setting up the non-lx container (at the bottom of the list). Once I went with the lx-ubuntu-14.04_20150320 everything worked. Is this a restriction as all the lx-XXXXXXXXXXX are older builds (i.e. no ubuntu 16.04 zones)? EDIT: It seems that the...

If I was to link a physical nic, should I set it up in Omnios first with IP, routing and DNS and then config it to the zone? Of course this means I would not have to bother with the virtual nic.

Can I edit zone.cfg to make changes to the LX zone after creation?

Here is what I have done so far 1. Deploy latest OVF napp-it_2017.01_ova_with OmniOS 151020 for_ESXi_5.5u2-6.5 2. General set up of VM (make sure vmxnet3s0 is connected on power on), create pool tank, create file system /tank/zones/, update napp-it 3. pkg install brand/lx 4. chmod -R 700...

Does anyone have a walk through or some tips on how to set up the network for the zones? I keep getting the error message that can't use the same device as used by the global zone or something. Is the next version going to make network setup easier?