So as some of you have saw, I received new storage hardware.
I wanted to play around with Omni & Napp-it, but I'm having tremendous issues even getting Omni installed.
I was lead to believe my reboot issue was caused by USB3.0 on the board, but I've made sure every single USB3.0 feature/BIOS...
I wanted to address a few questions in a separate post, so here it is:
My core is all 10GbE, with most of it bonded. We're not ready for 40GbE yet, but I've been keeping an eye on our various teams, and expect we'll be there in the next year or so.
The video workstations will have Sanlink2...
Here are the specs for the JBOD & Headunit:
- 2 x Quad-Core Intel Xeon Processor E5-2623 v4 2.60GHz 10MB Cache (85W)
- Intel C612 Chipset - Dual Intel 10-Gigabit Ethernet (RJ45) - IPMI 2.0 with Dedicated LAN Port
- 16 x 16GB PC4-19200 2400MHz DDR4 ECC Registered DIMM
- 2U Chassis...
"All of the above"
ZFS replication offsite.
Also S3 with versioning turned on.
I'll post more pictures / updates soon. I'm trying to play around with napp-it, but OmniOS just reboots after getting to the install menu.