got a 7452QS with EPYCD8 and 6800xt, GPUZ shows that PCIE runs at Gen4,
but there comes a lot of PCIE error in windows event,
so question is if there is anyone use the 7452QS with PCIE Gen4 runs well without pcie error?
I recently purchase a 7452 QS 57-04 on EPYCD8, 8x16GB 2400.
And I found that some temperature in HWInfo64 was ridiculous high:
As you can see that "CPU Die (average)" was around 72°C and when I run the Prime95 torture test it'll quick raise up to 100°C (TjMax), but the CCD temp seems...
See through the article, I figure out that:
1. AMD has implement some mechanism that allow server vendor like DELL to install a public key into PSB (Platform Secure Boot), and then the system will only boot with the firmware signed with corresponding private key.
2. PSB (Platform Secure Boot) is...
Sorry for mistake in prev post, original SetVKVMStatus has two branch which set "oem_int_vkvm_status" to 0 or 1 via aim_config_set_int, so we must make sure this function will not set "oem_int_vkvm_status" to 0 in any condition, which is change 0x0000E0CC to "MOV R1, 1". and changed CMP R3, 1 to...