Hello STH, I recently bought a 12xLFF backplane detached from the DL380P with a SAS expander chip. When I tried to connect it to the LSI 9207-8i I used before, I found that after entering Windows Server 2016, only one of the 6 hard drives I inserted was recognized. The strange thing is that in the bios interface I can see all the hard drives. I tried to enter the setting interface of the HBA card and found that although the expander chip and all the hard disks can be recognized normally, the positions of all the hard disks are displayed as "bay 0". This confuses me, I don't know what the specific problem is, I want to ask for your help.
I currently have a few guesses:
1. Do I need to use the HP version of the HBA card for normal recognition?
2. Is it because of some problem with the SAS expander chip that all HDDs are assigned to one address, so that the system can only recognize one HDD?
3. Is it possible that the system cannot be recognized due to a problem with the system? (Because I still can't solve this problem after turning on MPIO)
BTW, there are some photos I took. (I only inserted three HDDs when I took the photo)
I currently have a few guesses:
1. Do I need to use the HP version of the HBA card for normal recognition?
2. Is it because of some problem with the SAS expander chip that all HDDs are assigned to one address, so that the system can only recognize one HDD?
3. Is it possible that the system cannot be recognized due to a problem with the system? (Because I still can't solve this problem after turning on MPIO)
BTW, there are some photos I took. (I only inserted three HDDs when I took the photo)