is my M5110e dead ?

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

darkspeed666

New Member
Jul 21, 2022
4
0
1
Hello,

I had download a firmware to my M5110e in my x3650M4 ... and get it totaly bricked :
- not seen on lspci
- LSI_Preboot megarec does'nt see my card...

Is it a way to get it back ?

Many thanks

Nicolas F.
 

mobilenvidia

Moderator
Sep 25, 2011
1,956
212
63
New Zealand
If lspci doesn't see it then pretty nothing will
Try other PCIe slots or a different computer but its not looking good

There is a tiny chance that LSIREC a linux app may, but unlikely
It can write FW to a PCIe address with cards in fault state but I've found if lspci can't see card then not much luck with with LSIREC either
You have to know the PCI address (that lspci would have given if it could see it)
 

darkspeed666

New Member
Jul 21, 2022
4
0
1
Hello,

Thanks for this advice.

Unfortunatly the card is soldered on motherboard and there's no device LSI in lspci output... :-( Perhaps some IBM Technician has some advice on this good old server (there's 2 dip switches just near the LSI Chip) ?

I will do this test : I've got another identical server so I can found the pci address on it ... and try this software !

Let's take my chance !

Thanks.