I've got a ConnectX-3 AOC-CIBF-m1 card. When running Windows, the card shows up, and I'm able to switch to Ethernet mode and get connected.
Under Proxmox, I can't seem to get the card to show up.
I'm using:
What am I doing wrong? How do I get it to show up as an Ethernet device?
Under Proxmox, I can't seem to get the card to show up.
I'm using:
- https://content.mellanox.com/ofed/M..._OFED_LINUX-5.5-1.0.3.2-debian10.9-x86_64.tgz
- http://www.mellanox.com/downloads/MFT/mft-4.10.0-104-x86_64-deb.tgz
Code:
# mst status
MST modules:
------------
MST PCI module is not loaded
MST PCI configuration module is not loaded
PCI Devices:
------------
02:00.0
Code:
# lspci | grep Mell
02:00.0 Network controller: Mellanox Technologies MT27500 Family [ConnectX-3]
Code:
# mlxfwmanager --query
Querying Mellanox devices firmware ...
Device #1:
----------
Device Type: ConnectX3
Part Number: AOC-CIBF-M1
Description: ConnectX-3 single-port QSFP; FDR IB (56Gb/s) and 40GigE; PCIe3.0 x8 8GT/s; RoHS R6
PSID: SM_1101000001000
PCI Device Name: 0000:02:00.0
Port1 GUID: 0cc47affff5f1a69
Port2 MAC: 0cc47a5f1a6a
Versions: Current Available
FW 2.30.3000 N/A
Status: No matching image found