Pfsense Issue

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
S

schujj07

New Member
May 10, 2018
29
16
3
40
I have dual Pfsense firewalls on version 2.4.4 Release p2 running on SuperMicro SYS-5018D-FN8T hosts. I want test having our LAN traffic go over the 10GbE port. However, every time I activate an interface assignment on the 10GbE port the router decides that all LAN traffic should be routed to the 10GbE interface rather than staying on the current 1GbE interface. This happens despite the LAN interface assignment never changing from its current port. Does anyone have any ideas why this is happening or possible fixes to my issue?
 
V

vudu

Member
Dec 30, 2017
63
23
8
63
Check under System > Routing > Gateways. I've had similar problems when changing LAN subnets. Sometimes the Default Gateway gets messed up.
 
You must log in or register to reply here.
Top Bottom