I'm moving my 1.2TB ioDrive2 from a 4U to a 2U chassis and need the low profile bracket. If you've got one you want to sell or you want to swap your short bracket for my full height one let me know. Otherwise if you happen to know a source for them I'd greatly appreciate it.
WTB/WTT: Fusion-io ioDrive2 short bracket
- Thread starter Aestr
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
I'm using these:
Low Profile Bracket for Mellanox CX354A MCX354A-FCBT MCX354A-QCBT MHQH29B-XTR 713752005420 | eBay
The bottom hole of the bracket mates with the hole on the card, and when the top of the bracket is bolted to the case, the PCI card is level with the PCI socket. It has good airflow and the leds are visible.
Low Profile Bracket for Mellanox CX354A MCX354A-FCBT MCX354A-QCBT MHQH29B-XTR 713752005420 | eBay
The bottom hole of the bracket mates with the hole on the card, and when the top of the bracket is bolted to the case, the PCI card is level with the PCI socket. It has good airflow and the leds are visible.
