I found a Docker. I'll need to run the test early Saturday morning so not to piss off those streaming from Plex.
Sent from my ONEPLUS A5000 using Tapatalk
Last edited:
Project: MiniRipper
- Thread starter DaddyGrant
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
Sent from my ONEPLUS A5000 using Tapatalk
Colour me thoroughly old-school I guess, but why does one need a docker image in order to run prime95...?
If you're only doing stress testing rather than benches, just start running it now but at low CPU priority and it shouldn't interfere too greatly with the plex work.
If you're only doing stress testing rather than benches, just start running it now but at low CPU priority and it shouldn't interfere too greatly with the plex work.
I used Prime95 for 1 hour for my load numbers.
44C CPU - 90W Idle
60c CPU - 210W Load (Noctua TR cooler)
44C CPU - 90W Idle
60c CPU - 210W Load (Noctua TR cooler)
Is the CPU at stock speeds or OC'd. Thanks for the results.
P.S. My build is getting close
I can't wait to see it in all of it's glory.Is the CPU at stock speeds or OC'd. Thanks for the results.
P.S. My build is getting close
Everything stock. The only thing "overclocked" is ram at 3200 CL14
No but if you like the ncase m1 then the best ATX or mATX I have case I have found that is almost smallest and well made is Cerberus
Cerberus | Sliger
I'm looking at doing a TR build soon. I was wondering about your thoughts on the 1950 vs 2950. I like the specs and such on the newer chip, but with prices down a bit the 1950 looks like a good bang for the buck. Maybe I could go that way and get more RAM...