e5-2695 v2 for $120-150 or less

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

oddball

Active Member
May 18, 2018
206
121
43
42
FYI, the chip I ordered came extremely clean. Will be tossing it in a server on Monday hopefully.
 

mrrensing01

Member
Dec 9, 2015
46
11
8
FYI, the chip I ordered came extremely clean. Will be tossing it in a server on Monday hopefully.
Were the pads of the CPU you got extremely clean too? IOW, no cleaning needed?

I'm laggin' on getting mine installed, but anxious to test...especially since they're going in single socket servers.
 

oddball

Active Member
May 18, 2018
206
121
43
42
Were the pads of the CPU you got extremely clean too? IOW, no cleaning needed?

I'm laggin' on getting mine installed, but anxious to test...especially since they're going in single socket servers.
Yes, very clean. There were small indents were the pins were pressed. But otherwise it was extremely clean. No finger prints or grease smudges.

I'm doing single socket on this as well.
 

svt3391

Member
Feb 11, 2016
113
17
18
Finally got a decent deal for two from Alex_Sari. I learned about the 10% ebay coupon from another post 3 days ago, saw Alex's listing for 5 extra at $149 a piece (probably from some of the returns??? hope not!). Offered and counter-offered and accepted at $140 piece, waited 2 extra days. Originally aiming at tomorrow's 10% coupon, but saw a new 10% coupon PICKUPSALE today and immediately paid. With about $11 shipping for 2, I ended up paying about $130 each which is not bad considering I missed the big sale in November.
 

oddball

Active Member
May 18, 2018
206
121
43
42
Just an update, tossed the E5-2695 v2 into a blade server yesterday. After a little hassle with Cisco's firmware the chassis recognized it.

Nothing is running on the server right now, but it's booted up idling. I used some Arctic Silver paste that claims you need 2-3 days of usage before it settles in. I've checked the CPU temperature and it seems to be in line with other blades, 41C to 55C.

For anyone who is doing an upgrade on a Cisco UCS you need to log into the fabric interconnect and acknowledge the new CPU to the CIMC manager. It was a set of four simple commands that are well documented. I stupidly expected it to just work out of the box...

I tossed a bunch of ram I had laying around in, half was 1833 and a few 1066 sticks snuck in. I need to yank those when I get a chance.

We have two other blades with older processors, E5-2640's that if this works out, and the deal reappears I'd strongly consider upgrading those CPU's.
 

svt3391

Member
Feb 11, 2016
113
17
18
Mine two showed up today. I got from Alex_Sari.
The package is really good. Individually boxed in plastic shell. Form insulation. Then bubble wrap.
The pins are somewhat dirty. Hadn't got a chance to clean up with medical swab yet. I can see a minor scratch on several contact points. Hope it's not something serious.
 

wildpig1234

Well-Known Member
Aug 22, 2016
2,198
443
83
49
How can i download from here? I dont have a baidu acc and is not chinese so have no idea how to register or use one ;(

ASrock X99 lock-50mv_免费高速下载|百度网盘-分享无限制
 

newabc

Active Member
Jan 20, 2019
465
243
43
CSS had been selling around 10x e5-2695v2 for $177 for one week. But it was sold out 2-3 hours ago.