Took about three weeks to get in but its really nice.
I decided to repurpose the Rosewill mining case, going with the Nvidia Volta gpu's when they come out and since the P106-100 1060 dedicated mining cards run so cool in it I think they will run fine in this little more space constrained case.
Specs:
Onda D1800 6GPU Mining Motherboard
Integrated J1800 CPU 2.41 GHz
4 gigs of DDR-3 ram
MSata SSD
1 sata port
4 usb connections, 2 on the back of the case plus two internal headers that will be used for the install of the os or os's.
The case is made just for the board, included the fans and the dedicated fan wiring harness (very clean install vs a bunch of molex connectors)
I am going to swap over the Evga 1000 watt platinum power supply and the gpu's.
What I gain with this swap is that it frees up the Rosewill mining case, has no risers (might be able to increase the hash rate a little) cleaner wiring routing and a real nice looking case.
I think this case would not really be that great for more powerful and or hotter running gpu's but the 1060's only use ~70 watts each so it should be OK.
The case is specially made for this motherboard, there is another case but the gpu # 6 is REAL close to the inside of that case were this one has plenty of room.
I decided to repurpose the Rosewill mining case, going with the Nvidia Volta gpu's when they come out and since the P106-100 1060 dedicated mining cards run so cool in it I think they will run fine in this little more space constrained case.
Specs:
Onda D1800 6GPU Mining Motherboard
Integrated J1800 CPU 2.41 GHz
4 gigs of DDR-3 ram
MSata SSD
1 sata port
4 usb connections, 2 on the back of the case plus two internal headers that will be used for the install of the os or os's.
The case is made just for the board, included the fans and the dedicated fan wiring harness (very clean install vs a bunch of molex connectors)
I am going to swap over the Evga 1000 watt platinum power supply and the gpu's.
What I gain with this swap is that it frees up the Rosewill mining case, has no risers (might be able to increase the hash rate a little) cleaner wiring routing and a real nice looking case.
I think this case would not really be that great for more powerful and or hotter running gpu's but the 1060's only use ~70 watts each so it should be OK.
The case is specially made for this motherboard, there is another case but the gpu # 6 is REAL close to the inside of that case were this one has plenty of room.
Last edited: