Hi All,
I had my first degraded pool in my home box. One of the WD red Drives (Bestbuy 8tb pull) was generating cksum errors. I went out to get a new replacement drive from BB since they were down to 149 ea and i was able to get red label based on SN and model number. I replace the drive causing issues. Here is a snip of the resilvering process.
I ran a smartctl -t long on the drive reporting issues and here is the smart info, it still has 10% of the test left.
Few questions:
should i worry about this drives integrity?
Will smart test show if the drive is bad, if so what values should i be aware of?
Can anyone tell from the current smart results anything?
Anything else i can do to check for issues?
additional info:
Freenas is running as a vm on esxi 6.5 latest build. It has 64 GB ram. the HBA are pass through, the disks are in a SM hdd chassis that is brand new. no other issue reported with any other drive (many are WD Red 8tb from bestbuy). I also patched Freenas to latest version prior to resilver. The pool is fine now with replacement drive.
I had my first degraded pool in my home box. One of the WD red Drives (Bestbuy 8tb pull) was generating cksum errors. I went out to get a new replacement drive from BB since they were down to 149 ea and i was able to get red label based on SN and model number. I replace the drive causing issues. Here is a snip of the resilvering process.
Code:
state: DEGRADED
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Thu Dec 14 16:41:03 2017
5.71T scanned at 222M/s, 5.67T issued at 221M/s, 5.71T total
1.83T resilvered, 99.17% done, 0 days 00:03:44 to go
config:
NAME STATE READ WRITE CKSUM
Data_Rz1_8TB DEGRADED 0 0 0
raidz1-0 DEGRADED 0 0 0
replacing-0 DEGRADED 0 0 0
gptid/3d689dc7-995c-11e7-9b6e-005056b7ee49 DEGRADED 0 0 2.18M too many errors
gptid/7b1ee4be-e117-11e7-9f28-005056b7ee49 ONLINE 0 0 0 (resilvering)
gptid/3e0c5992-995c-11e7-9b6e-005056b7ee49 ONLINE 0 0 0
gptid/3ebadb19-995c-11e7-9b6e-005056b7ee49 ONLINE 0 0 0
logs
gptid/217ad003-c8c6-11e7-b592-005056b7ee49 ONLINE 0 0 0
Code:
=== START OF INFORMATION SECTION ===
Device Model: WDC WD80EFZX-68UW8N0
Serial Number:
LU WWN Device Id: 5 000cca 3b7cd3d62
Firmware Version: 83.H0A83
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Dec 15 14:03:56 2017 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 241) Self-test routine in progress...
10% of test remaining.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1159) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 112
3 Spin_Up_Time 0x0007 156 156 024 Pre-fail Always - 387 (Average 455)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 77
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 5001
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 77
22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 323
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 323
194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 21/53)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4987 -
# 2 Short offline Completed without error 00% 4986 -
# 3 Short offline Completed without error 00% 4985 -
# 4 Short offline Completed without error 00% 4984 -
# 5 Short offline Completed without error 00% 4983 -
# 6 Short offline Completed without error 00% 4982 -
# 7 Short offline Completed without error 00% 4981 -
# 8 Short offline Completed without error 00% 4980 -
# 9 Short offline Completed without error 00% 4979 -
#10 Short offline Completed without error 00% 725 -
#11 Short offline Completed without error 00% 724 -
#12 Short offline Completed without error 00% 723 -
#13 Short offline Completed without error 00% 722 -
#14 Short offline Completed without error 00% 721 -
#15 Short offline Completed without error 00% 720 -
#16 Short offline Completed without error 00% 719 -
#17 Short offline Completed without error 00% 718 -
#18 Short offline Completed without error 00% 717 -
#19 Short offline Completed without error 00% 716 -
#20 Short offline Completed without error 00% 715 -
#21 Short offline Completed without error 00% 714 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
should i worry about this drives integrity?
Will smart test show if the drive is bad, if so what values should i be aware of?
Can anyone tell from the current smart results anything?
Anything else i can do to check for issues?
additional info:
Freenas is running as a vm on esxi 6.5 latest build. It has 64 GB ram. the HBA are pass through, the disks are in a SM hdd chassis that is brand new. no other issue reported with any other drive (many are WD Red 8tb from bestbuy). I also patched Freenas to latest version prior to resilver. The pool is fine now with replacement drive.