FS- HP S6500 Blade w/8xSL390s. Dell R715x3 Mellanox

[H8ROADS]

Hi All,

I'm remodelling my house and have to liquidate my lab unfortunately. I'll probably end up rebuilding stuff later after the dust is cleared.

I have an S6500 HP Blade Chassis that's been sitting for about a year with 8x SL390S blades. Some have dual Xeon 6core procs, some have no procs. All have the addon card for 10/40Gb connectivity. No drives or memory. Make me an offer!

I have 3x Dell R715 with 128GB of ram and 2x12core opterons. Makes for great home lab capacity. Runs quiet with 1x750W PS each. No drives. Make me an offer!

I have a mellanox 24 port switch with ethernet over infiniband key pre-installed. Make me an offer!

I have some other misc gear including DDR3 RDIMMs and a Extreme Networks 48port switch (that I never got a chance to reset but was working great when pulled from rack. Will need to be consoled in and hard reset)

I'm taking any and all offers on these, as anything left is going into the dumpster. I have boxes the dells but shipping is likely not cheap. No box for the S6500, but we can figure it out..maybe a pallet and shipped freight.

I'm in Denver, CO for any locals.

 

[frogtech]

You have to post prices

Sent from my LG-H811 using Tapatalk

 

[H8ROADS]

I'm just looking at ebay and finding going rates to give you a place to start, but best offer for everything.

How about $500/each for the Dell R715s
$700 for the S6500+blades
$1000 for the Mellanox switch

 

[DaSaint]

Just for awareness the Mellanox Switch should be a Mellanox SX3036 with the Ethernet Gateway Key - should be 36x FDR - QSFP Ports that are up-to 56Gb IPoIB Capable and 40GbE @H8ROADS you will have to confirm but IIR thats what u had.

 

[i386]

Sx6036 + ethernet key for 1k $? That would be f*cking awesome

@zeynel I think you wanted an infiniband switch with ethernet license?