It's alive. The flash finally took using the CH341A. (sorry last post)
Supermicro wouldn't help me so the motherboard was destined for the scrap pile.
I pulled my CPUs, pulled all risers, pulled PSUs, pulled CMOS battery, pulled TPM. Basically pulled everything except the cabling to the...
Got another CH491A, no difference/same error. Going to see if SuperMicro can help me else I'll just sell it for parts. The machine is mint condition and I go ahead and kill the board :oops:
Removed the TPM module...
Tried uploading the flashrom backup I made of the original locked 3.8 BIOS using web gui but that errors with "BMC can't force ME to recovery mode."
Uploading SuperMicro 4.2 bios using sum fails package verification.
~/Downloads/x11dpu_4.2 $ ./sum -i 192.168.0.195...
Tried using the debian image you had, no difference.
Also, my board currently bricked. Power button doesn't work. IPMI still accessible but it won't power on from web gui either. I ordered a different CH341A from amazon in case I somehow got a lemon and to resurrect this doorstop. If anyone...
Nice. Care to share what commands you ran? What version of flashrom and what OS? I think I have 1.3.0 but curious if you built from source.
Trying to understand if I have a bad programmer or if I'm just doing it wrong... I disconnected it from power, took out CMOS battery (also tried with it...
You're right, I took the bios sticker off and it is a MX25L25673G. I'm just using the most recent version from `apt` on latest Ubuntu for `flashrom`. Is it possibly outdated? The one it matched to is the only one that is shown by `flashrom -L` that begins with MX25L256
First time I've ever...
Let me know if you have better luck than me... I backed up the BIOS fine but it failed during writing, ugh.
$ flashrom --programmer ch341a_spi -w BIOS_X11DPU-091C_20231215_4.2_STD.bin
flashrom unknown on Linux 6.5.0-26-generic (x86_64)
flashrom is free software, get the source code at...
I got this same system from another seller but also cannot update the BIOS (BMC updated fine). I tried to follow the suggestion from the X10 thread (https://forums.servethehome.com/index.php?threads/supermicro-6028u-trtp-x10dru-i-barebone-349.30584/post-414803) , but `/GAN` doesn't seem to be...
Sorry to revive an old thread, I think I got one of these cards (Dell OEM) and the red/green light are on immediately when I turn on the server. Doesn't show in `lspci` in ubuntu. `sas3flash.efi -list` under UEFI shows No Avago SAS adapters found (Version 13.00.00.00). Been reading the forums...
If anyone was looking for one, this seller accepted my offer of $100 for one (only 1 left), Dell LSI SAS9305-16e 16-Port 12Gbs SAS Controller / 00VYM4 - Low - VGC | eBay
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.