I found this..
https://enterprise-support.nvidia.com/s/article/PCIe-AER-Advanced-Error-Reporting-and-ACS-Access-Control-Services-BIOS-Settings-for-vGPUs-that-Support-SR-IOV
Only one entry for AER in the manual.
Enabling this does nothing to solve the issue. So AER must be enabled for ACS to...
So I'm seeing errors with a new Proxmox install. I'm getting the same error as the link to serverfault.com below.
I have the ASUS Hyper M.2 x16 Gen 4 Card NVMe expansion card. Setting the slot to AUTO or PCIe GEN4 generate the issue in the screenshots below. Setting to GEN3 as mentioned in the...
Build date is off but that is probably the BMC firmware.
This is mine. Pretty sure I'm as updated as I can get since I don't have a 64MB ROM for firmware version 4.xx and above.
The post process on this board is pretty slow with all the checks it does. Is there any way to speed this up? I seen a quiet setting in the bios but haven't played with it yet. Does that just post without showing anything on the screen?
Thanks. I was comparing my 7700k desktop machine numbers in aida64 and memtest and they were very similar. So seeing these numbers so low I thought there might be something to it.
I'm just setting up my board and running MemTest to make sure that I have no issues with my used memory, so far so good! But the memory benchmarks look pretty low. I basically have the bios set to default minus enabling bifurcation and IOMMU. Googling my memory M393A4K40CB2-CTD it seems like my...
I just went to Computers, Monitors & Technology Solutions | Dell Canada, logged in and spoke to chat about ordering part number DHR6X. I can use the parts that came with my board but I want uniform mounts. I'm not exactly sure what the reasoning is be-hide offering two types of house that come...
I imagine that we all bought from the same seller, I have both sets of mounting solutions as well but not really fond of either. I think I'll end up using nylon bolts and screws to fasten down the drives when I populate them.
It's still kind of crazy how hard it is to purchase these on their own.
There are two nvme m.2 slots on the Tyan. What kind of mounting hardware do you need to secure a 2280 drive? I see two holes lines up on each slot but not sure what the hardware is called to purchase.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.