Rest for 10-15 minutes. But blinking cursor is gone - 100%.
When server was not in working environment this winter and resides in my home's veranda - after very cold nights with psu powered ON but server OFF - it do not start with some strange beeps, it happen at least 2 times. System power on...
Checked yesterday - it's working! Changed memory voltage to 1.5v intend of Auto and that's all! Fully power off (cold boot - psu switch) 3 times - no problems.
Thanks again to LedAlex for his finding and for sharing solution with us.
Thank God for your help LedAlex! It's exactly this problem and I have 2 x 8 GB Low-power 1.35v ECC modules. Asus support sucks - write to them everything - no real help at all.
This is my config:
MB & CPU ASUS P9A-I/C2550/SAS/4L x 1
RAM Transcend 8GB DDR3 ECC x 2...
Do you have the "cold boot" problem?
I try to use bootable Win 7 from RAM usb stick - does not boot at all. But bootable Windows 7 x64 SP1 USB installation media (created with Microsoft tools) allow to install OS to SSD without problems.
How many actual owners of this board here? Is everyone have the cold boot problem? I can go around this problem by using 2 * time relays for pressing Reset Button automatically for 1 second after power is ON and system boot. But this is a reserved solution.
Have only one problem with this board - after power outage (cold boot) - the system hang with black screen and blinking cursor at upper right corner. So to boot the OS I need to manually Reset or Soft Power Off/ Power On the system. This only happens at cold boot.
Anyone have the same problem...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.