Synology DSM DIY Custom Build Guide
Out of Box Compatiblilty:
CPUs:
Intel CPUs with iGPU (Atom, Pentium, i3, i5, i7, Xeon)
(AMD CPUs GPUs / NVidia GPUs are not supported - you will need recomplile kernel from source with injected linux drivers - this process must be repeated everytime a kernel...
I have never heard the fan ever, not on startup / cold start.
My ambient temperature is 22-23c
System Ide
System Active - After approx 20mins of copying 200GB data between RAID volumes
These temperature readings (before & after) looks normal to me, so the PSU is the likely cause of my...
Thanks for running those stats, your temps are what i was expecting, give or take 10% either way.
During the old configuration the PSU was very warm, you could touch it but you wouldn't want to do that for very long. - (this was after weeks of up time). I did not get an actual temperature...
HDDs in the 30c range is very acceptable at idle.
Only difference is i am was running the 350W version of the same PSU - Seasonic SS- 350 M1U Active PFC
Seasonic 350 M1U Active PFC F0
Current system is working too well to take apart for PSU testing and my other itx mobo with ATX power died (no...
@marcoi
'XPEnology' - XPEnology community - all the info you need is there
@EffrafaxOfWug
I dont why when the Seasonic PSU is used the 2 HDDs nearest to it always runs hot - when I opened the case to check the PSU was quite hot too. - the fan on the PSU never seems to run at all, thus hot PSU...
Hi All
I have just purchased a IBM M5014 controller from ebay with BBU, I understand this is a cut down version of 5015 (i,e 256MB cache and no BBU as standard) 5015 512MB and BBU as standard.
IBM Manual states SATA2 only, we know this is a SAS2108 chip (aka. SAS 9260-8i).
Can I flash...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.