Recent content by Sorin

  1. S

    Quanta LB6M (10GbE) -- Discussion

    Seems there is a forum limit for 10000 letters/post so here is my second post ( as it did not fit in the first). As you can see there is ssh and web access for it and it works. This is just temporary as it does not modify any file on your switch, but don't come after me if all hell breaks loose...
  2. S

    Quanta LB6M (10GbE) -- Discussion

    Below you can find a snippet of a lb6m running Indigo on 2.6.25-bcm-ntsw I had tried all the ports and they seem to work but as you can seem there are som inconsistencies as port 1 is port 49 and port 9 is port 2, port 10 is port 3 .... for those playing at home: (you need to have u-boot, if...
  3. S

    Quanta LB6M (10GbE) -- Discussion

    Once we ( me and somebody else from the form whom will remain nameless for now ( as he owns a switch like this) ( I don't yet) ) have it all working I will post here the result. What I can tell you is that I managed to start a https server on the switch using "ip http secure-server" command and...
  4. S

    Quanta LB6M (10GbE) -- Discussion

    I am working in getting ipv6, dos-control, http and all the rest working (including bgp, switch stacking).... have a little patience. Thus far I managed to start https on a switch that did not have the option ( actually I have all available commands (including ipv6) ) but they need to be tested...
  5. S

    Quanta LB6M (10GbE) -- Discussion

    In order to access the actual linux and play with the switch, boot the switch in debug mode (option 2 at boot options) and you will be presented with the following options: FASTPATH Startup -- Utility Menu 1 - Start FASTPATH Application 2 - Load Code Update Package 3 - Load Configuration 4...
  6. S

    Quanta LB6M (10GbE) -- Discussion

    @sthsep license advanced <key> where key is the license key. We would need to crack that. that's what you need to get them working. or just patch the 'switchdrvr' executable to think you have all the options
  7. S

    Quanta LB6M (10GbE) -- Discussion

    if anywone is looking for the root user password: "lvl7dbg" (without the quotes), which is also the "drop to shell" diagnostics password From what I can see it might only work via telnet (not ssh). so I think you would need telnet enabled for this to work. Extra 1: LB6M seems to share the same...
  8. S

    Quanta LB8 48x10G - $375

    too much for a broken switch. I'll pay around 150 + shipping for a broken one. I have no idea if I can get it to work in the first place. it's just a hobby for me. if anyone is willing to sell his broken switch for that we can talk
  9. S

    Quanta LB8 48x10G - $375

    don't know tell me a price... If I can later make it work using uboot I will post here the results and a howto
  10. S

    Quanta LB8 48x10G - $375

    Anyone willing to sell their broken lb8?