Recent content by serverworks

I have installed 4 noctua fan speed reducers in the power supplies and it seems that they were the more annoying of the fans in my lb6m. I will try to find the section of the discussion about reading temperature and consider changing the fans in the hot swap fan module. But as i said it seems...

I will try to clear up the confusion, The problem connection is between a nas4free (freebsd 10.2) and windows 10 machine. windows 10 machine has desktop asus gaming board core I7 4790k 32 gifs of ram, Nas4free unit has supermicro x10 pentium g3258 and 32 gigs ecc if that helps.

Hi I will try to make this as clear as possible, and thanks in advance for any help. I have 2 Nas4free boxes 1 with intel x520-da2 10 Gb ethernet the other with 2 mellanox connectx2 10Gb ethernet. all are direct attached copper connected directly without switch. The intel one will recieve at 9.7...

Hi I purchased Xeon E3 1230 v5 today and want to buy 2 x 32 GB Kingston unbuffered ecc LRDIMM. Will this be compatible with this cpu. Here is a link to the memory that I want to order Kingston ValueRAM 32GB DDR4 2133MHz ECC With Parity (1x 32GB) at Memory Express. Any help would be...

I would like to ask for some help on how to create a startup script to use ataidle to stop my drives from self destructing themselves by parking all the time. I have little experience with command line etc. I was able to use the command line to set each drive after each boot but it does not hold...

If I only had a pcie gigabit NIC to eliminate all variables the only ones I have are pci and pcix but this mb only has pcie slots :(

if I cant get this corrected should I buy intel i210 card to get the igb driver instead of em, or will the 82574 (em) be worth a shot at less than half the price?

All cables are cat6 and have been swapped out to test if that's the problem.

Switch is TP-Link TL-SG1024 24 port gigabit rackmount dumb switch. Built in NIC is Intel 82583V gigabit. Output of ifconfig: em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=4019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO> ether...

It would seem that it is performing at 100mb but it shows connected at 1000mb/s

sorry for double post, DD write speed is 375 MB per second dd read is 430 MB/S

I just finished upgrading my backup server. Specs are Asus crosshair v formula z mb with built in Intel gigabit. AMD FX-8350 CPU, 16 gb ecc crucial 1600 ram, IBM m1015 P16 IT mode, Chenbro 3gb sas expander hooked to 10 raidz2 HGST Megascale 4000 b 4tb drives. Nas4free 10.2.0.2. my write to the...

Sorry for the delay, the reason I am thinking of the 2tb reds is because many people have said that the 2tb drives are more reliable than bigger drives. I could continue with the WD SE but the cost is prohibitive. This 1150 platform can only use 32gb of ram according to specs(may or may not be...

I already have the 20 wd se enterprise drives but not the reds and I have 16 gigs of ram but planning to go to 32 gigs just to make sure, also I am currently running the mobo with Pentium g3258 but it is sometimes running upto 85-90 percent cpu usage which is why the 1271v3

Hi I have decided on a final setup Mb supermicro x10 sll f-o Cpu 1271v3 Lsi 9201 16e connected to 2 se3016 jbods with 32 x 2tb reds Lsi 9201 16i connected to 4 backplanes of the 4220 9211 8i connected to other backplane (4x slot) 20 x 2 tb se 32 gb crucial 1600ecc 1.35 volt Os nas4free Any...