Recent content by Nz0

The firmware is brain dead. I neutralized the pwm cable to have the fans running at 100%. Hmartin made a mod to control his fan manually with a little pwm controller that you can find online for a few bucks. My cpus are v1. Envoyé de mon SM-A320FL en utilisant Tapatalk

The PSU is a separate board when you have a dual node and there are also fan connectors on the board. This what I have. You should look at the mod of hmartin for single board...

Are you importing into Europe? Envoyé de mon SM-A320FL en utilisant Tapatalk

Hello Patrick Do you still accept miners? 2x Dual E5-2660 Cheers

Did you look here? May be it could help. Server/SpecsAndDesigns - OpenCompute Intel Xeon server v2 cad (dxf) files. HTH Envoyé de mon SM-A320FL en utilisant Tapatalk

It is a pcb jumper near the cmos jumper. I never used a pcb jumper. I don't know how. Envoyé de mon SM-A320FL en utilisant Tapatalk

Mine running at 100%. The second fan per hs makes 2-3 C difference.

So true. The box looks very sweet indeed.

I run Ubuntu xenial proposed and it runs a bit faster than xenial official. I tried both low-latency kernels but they were slower.

I did not, you nailed it :) With this flag the results are better. Around 3030 and Max at 3043.3. Almost on par with xmr-stak (3099 sometimes 3109).

Download Center | QCT- Quanta Cloud Technology

Which bug?

For cryptonight-lite With no option at all. The hash rate is swinging between 2.6 and 2.9k. Do you know why it is swinging? -v 2 => 2.9k stable -v 2 --doublehash-thread-mask 0xF0F => 2.5K stable -v 2 --doublehash-thread-mask 0x707 => 2.4 stable Actual xmr-stak => +3K (AES-NI, Hugepages, no...

Thanks a lot for your help. Edit:For the full story I only neutralized one pwm fan and the mobo detects it at 0 RPM and kicks the other fan to 100%.

2x 2660 v1 Tks