Recent content by Micha

Hi AP, thanks for the info with the LEDs on the MEM board, it's reassuring if they do not light either somewhere else. Not sure whether I expressed myself badly last time--I can boot now. And so far all DDR3 modules I have around are working (see my last post for models), at least with 1, 2 or 4...

Hi, I have to ask for advice again. I now tried two different types of 1.35V RDIMM-1600 16Gb modules: 4x Samsung M393B2G70BH0-YK0 (1.35V RDIMM-1600, 16Gb) and 1x Hynix HMT42GR7AFR4A-PB. The Samsung is not exactly (albeit ...QH0-YK0 is) in Supermicro's list, however, the Hynix module IS...

Thanks again, that helped pretty much! I can order my RAM now. All the best

Hi AP, and thanks for the fast reply. That's a relevant info, OK, so I better stick DIMMs confirmed by SM. Could someone please give me a hand with some minimal number of DIMMs that could/should work in a MEM1 board? Supermicro's X10QBI manual for the board seems quite silent on that, the X9...

Hi, I recently got a X10QBI barebone system with MEM1 Rev.1.01 boards. My previous experiences were from X9 quad-CPU boards, and from skimming the table at 2-17 in the SM manual, I had somehow hoped that my 16GB RDIMMs 2Rx4 1333 (Samsung M39382G70BH0-YH9) from the X9 system could work. For...