Markess's latest activity
-
MMarkess reacted to 86turbodsl's post in the thread Cheap 10Gb SFP+ enterprise gear - whats out there? with
Like.
Well, i jumped in with both feet. I got an offer for a ICX6610 for around 80 shipped in my inbox this morning so i took the plunge. I... -
MMarkess replied to the thread Cheap 10Gb SFP+ enterprise gear - whats out there?.For my "remote rack", which is in the garage where noise and heat aren't as much an issue, I recently picked up a HP 5700 Series non-POE...
-
MMarkess reacted to mattventura's post in the thread Supermicro SAS-826A backplane drive slot to SAS cable assignment? with Like.
The backplane supports management. Assuming your HBA supports it, install ledmon, and run `ledctl locate=/dev/sdb`
-
MMarkess replied to the thread First Home Server Build | Tyan S7070A2NR-B (Not A Great Start...Please Assist...).This ^ So VERY VERY true. Ask me how I know. :p
-
MMarkess reacted to nexox's post in the thread First Home Server Build | Tyan S7070A2NR-B (Not A Great Start...Please Assist...) with Like.
It also doesn't usually cause quite the symptoms you're experiencing, but if you're using a modular PSU make sure you haven't mixed up...
-
MExcept what you're talking about are usff desktops being used as servers. While the exact specifics mentioned in this thread may be...
-
MI think that is a good question, and the answer will vary wildly depending on who answers. From a manufacturer standpoint, there is...
-
MMarkess replied to the thread First Home Server Build | Tyan S7070A2NR-B (Not A Great Start...Please Assist...).Well.....last gasp things to check? Unlikely, but....anything conductive on the test bench under the board that you may have missed...
-
MMarkess reacted to OtakuLife005's post in the thread First Home Server Build | Tyan S7070A2NR-B (Not A Great Start...Please Assist...) with Like.
My model does not have IPMI unfortunately. As for the second 8-pin, I'm not sure why I never bothered to try that; I will try this in...
-
MMarkess replied to the thread First Home Server Build | Tyan S7070A2NR-B (Not A Great Start...Please Assist...).Which version S7070? If one of the ones with IPMI ( S7070WGM2NR or S7070GM2NR), have you tried to log onto IPMI to see if there's any...
-
MMarkess reacted to ms264556's post in the thread What in the ??? Binardat 4 Port 2.5G Switch with 2x10G SFP with Like.
Here's a couple of my old Netgear 1Gb switches switches vs the 2.5/10Gb replacements. Sizes are definitely in the same ballpark.
-
MMarkess replied to the thread What in the ??? Binardat 4 Port 2.5G Switch with 2x10G SFP.Yeah, its kind of crazy. I recently got an 8 port all SFP+ 10Gb switch (XikeStor SKS8300-8x) that's about the same size as the...
-
MMarkess replied to the thread I want one.I use an E302-9A as my pfSense box. Huge Spouse Approval Factor for 0 noise in our bedroom closet (where all the Internet and house Eth...
-
MMarkess reacted to nexox's post in the thread Any cheap reasonable Skylake single or dual cpu MB you can recommend? with Like.
Why put a GPU in it? I agree that's an odd PCIe slot layout, but it has onboard video and IPMI, just use those for initial testing.
-
MMarkess replied to the thread Motherboard/CPU Advice for Simple File Server.The one marked #1, an the same side of the board as the 24 pin connector.