Recent content by mailinglists

  1. M

    Flash M5014 to IT mode?

    Hi guys, is it possible to flash IBM M5014 to IT mode? I know M5015 can be and I already have LSI FW (IR mode) on M5014, but for ZFS, we need IT mode.
  2. M

    What to do with Quanta T3048-LY2 switch

    For everyone else, who can not get QNOS licenses, I think SONIC might work as well. https://azure.github.io/SONiC/ Try and report back. I see people report it will not work as it is PPC arch. I guess one can use older CumulisLinux images, that were still compiled for PPC. Hint: C.L. might even...
  3. M

    What to do with Quanta T3048-LY2 switch

    How many LY2R units do you have? Maybe, just maybe, we can work something out in private to get you your MLAG supported licenced QNOS without Quantas help. :-)
  4. M

    What to do with Quanta T3048-LY2 switch

    @hatchi you are correct, QCT won't support them :-) However QNOS can be found on Quantas website. I am willing to buy them at a cheap price, if you, or any others are interested. Cheap means 300$ per unit. Even the ones that do not have any OS installed or any license. On a related note, I am...
  5. M

    Turbocharge your Quanta LB6M - Flash To Brocade TurboIron - Big Update!

    Has anyone tested FastIron Multi-Chassis Trunking as described in manual page 885 on these switches? Can anyone, who has two of these, test this?
  6. M

    [SOLVED] Change MAC address on Quanta LY2R

    If anyone cares, I managed to permanently change the mac address. Details can be given in private, if you msg me. It takes quite some effort, but works. :) Now, if anyone has valid QNOS license for any MAC, please let me know... in private. :-) Sadly Quanta won't sell me any for switches I...
  7. M

    [SOLVED] Change MAC address on Quanta LY2R

    I might be successful in saving the MAC to flash, if I erase that part of flash first. Any ideas how to find that part of flash?
  8. M

    What to do with Quanta T3048-LY2 switch

    Hi guys, I have almost exact same problem. Any help would be appreciated. I opened a new thread here: https://forums.servethehome.com/index.php?threads/help-me-get-qnos-on-quanta-t3048-ly2r.29345/
  9. M

    [SOLVED] Change MAC address on Quanta LY2R

    Hi guys, can anyone help me permanently or temporarily change MAC address with U-Boot on Quanta LY2R? This does not work: => setenv ethaddr CENSORED:AA => saveenv Saving Environment to Flash... Un-Protected 1 sectors Erasing Flash... . done Erased 1 sectors Writing to Flash...
  10. M

    [SOLVED] Looking for 7.39.00.00 mptsas2.rom (need to get aroud NMI red screen error in HP Gen8)

    Hi, i got HP DL380p Gen 8 server. I bought Fujitsu D2607 card and flashed it to LSI firmware in IT mode as shown here: https://forums.unraid.net/topic/57815-fujitsu-d2607-8i-crossflash-to-lsi-9211-8i/ Now I have a NMI error and am looking to replace 7.39.02.00 mptsas2.rom with non NMI error...
  11. M

    2 x interconnected Quanta LB6M won't forward tagged VLAN traffic over LAG

    Clients are 802.1q aware hypervisors. Tagged vlan traffic works among-st other hosts on the same switch, if just fails to traverse internal bond to the other switch. :-( I do not understand why not. Config seems fine to me. :-/ Here is the config for client port: interface 0/4 no spanning-tree...
  12. M

    2 x interconnected Quanta LB6M won't forward tagged VLAN traffic over LAG

    Thank you for reply. Current config. first node: interface 1/1 description 'Port-channel na XXXXX' no port-channel static port-channel load-balance 6 no spanning-tree port mode mtu 9216 vlan pvid 113 vlan participation exclude 1 vlan participation include 113,600,666-667 vlan tagging...