Recent content by Laugh|nGMan

Just for reference. Not sure what i doing wrong, but i have boot issues with x13sem-tf with Xeon Gold 5515+ with pair sticks of ram, board spins up for second and nothing happens. BMC heart beat is ok. BMC and bios updated to latest, bios v2.1 with EmeraldRapids support, nothing changed,still...

probably second u.2 drive on mcio dont want to initialize due there is seme logic put on these sm backplanes funny thing is that same mcio cable is mentioned in sm faq but for mb model x13sei-tf….atx forrm factor i think and there is no such a problem :) Question Our motherboard is...

Looks like some limitaton on these board or u still need correct backplane to utilize MCIO connectors….. to hit your target for all eight u.2 drives. from sm faq section on their web site…. Question Can X13SEM-F/-TF support 2 NVMe drives by directly connecting them to any one of the four...

my adventures with gigabyte mb for comparison: GA-B150M-D2V DDR3 i5-6500T only passive heatsink 2x8Gb ram 4x sff hdd from wd 1tb reds ( parity drive+3data drives) 2x intel ssd 100gb dont remember maybe 310 model lan mellanox 4 two port 100gbe in x16 slot micron 7400 pro 960gb with namespaces...

OK netflix blog talks about pbufs https://netflixtechblog.com/serving-100-gbps-from-an-open-connect-appliance-cdb51dda3b99?gi=1c460d70ae99

Maybe memory bandwidth bottleneck? According to Anandtech:”.. v3 has access to 15-21% more bandwidth than the v2. Single socket v2 Ivy hitting 54 GB/s, so v3 maybe max. 65 GB/s. With 2400 memory ~76 GB/s ?! Prety sure u need six or better octal ch. system for single socket. If i remember...

......Liqid LQD4500 Honey Badger.

Ivy bridge from 2013 Chrome 79.0.3945.130, win 10 b1809 on 1650v2 (3,6GHz) result 1128.97 Opera/Chrome 85.0.4183.123, win 10 b1809 on 1650v2 (3,6GHz) result 1054.6 Vivaldi/85.0.4183.123, win 10 b1809 on 1650v2 (3,6GHz) result 1081.08 Firefox/78.0, win 10 b1809 on 1650v2 (3,6GHz) result 1068.69

No offense IamSpartacus Approx. 20% (8/38 of your streams is <1.0 transcode speed, so I think for end-user they would be unwatchable/with some degree of buffering (Why is my video stream buffering?). Less than 1.0 – the Server is unable to transcode fast enough Second screenshot 6/10 streams...

Sorry for derailing thread a little bit. FYI According to this Mellanox Knowledge Article HowTo Configure NVMe over Fabrics (NVMe-oF) Target Offload for Linux OS using ConnectX-5 (or later) adapters. There are some difficulties with more than one namespace. Note: Currently, an offloaded...

Heh! Nice findings. But when nvdimms populated with 2gen cpu. This board uses 4ch or 6ch memory controllers? Anybody have info.

Yeah but why in this pdf not a single word about nvdimm.. https://www.supermicro.com/support/resources/memory/X11_memory_config_guide.pdf 5.3.1 Page 8

3. At such a low price, x11spm board unlikely supports Optane DIMM. + I think U need 8 ram slots as minimum.

1000 Air Flow (LFM) for Active 3.5W cable type.

That was IDLE 15min after boot. 75 was under benches with iperf3. Yestesterday. Example, this evening.....15hours IDLE, mget_temp.bat -d mt4121_pciconf0 shows 79