Two-fold use case here.
I’m regularly working cross-platform and utilize many VM’s and bare metal servers/workstations. Sometimes accessing them from remote locations, sometimes while on-site. Most of the VM’s are KVM platform, with a GPU passed-through. The bare metal machines, of course have...
I’ve got several of the same server cases, along with various other supermicro cases. I’ve utilized several methods for achieving this.
Not knowing your use case, or comfortability working with voltage, so I will just tell you what I have done.
In one of my racks, I have several server cases...
I figured I should come back and give an update. I made some progress!
I went through all of supermicro’s software defined storage solutions. Among the Solutions was Excelero. I talked with them
extensively, but the software license was cost prohibitive for the subscription.
I learned that...
I’ll try a different slot. I’ve got the RAM plugged into the first blue dim.
And the second set of beeps is weird. It’s faster and not the same rhythmic pattern.
Yep, I reset CMOS. I just changed the jumper on BMC. I get the same amount of beeps. No video output yet, but it could be taking longer than usual to boot.
So far, nothing yet.
Yep, I reset CMOS. I just changed the jumper on BMC. I get the same amount of beeps. No video output yet, but it could be taking longer than usual to boot.
So far, nothing yet.
I narrowed it a little bit.
The BMC Led light on the motherboard is not blinking, this goes along with the beeps I am hearing.
Not sure what to do from here, but starting the search.
I will check, but I think they are all pci-e 2.0
I’ve got a little xpenology box with the same
Situation, where I put a single 10gbe Chelsio adapter in a 1x slot, works great. Of course it won’t hit 1 gigabyte per second, but will do a little over half. Depending on your setup that might be...
One of my Supermicro X9's won't post. It has been working without issue for months. I powered it down to install new HBA, powered back up and get 5 beeps, and no post.
Removed all RAM, HDD, PCI-e cards, installed 1 stick of brand new RAM. Powered back up I get the same 5 beeps. (the tone is...
I've got 4 Extra 10 10GBE NICS I purchased last month, which turned out to be overpurchased.
I've got
2 Chelsio T-422-CR (Dual 10GBE SFP+ and dual 1gbe) -> $60 Each
1 Chelsio T-440-LP-CR with Spider Cable (4x10GBE) -> $100, $75 without Cable
I'll make a package deal if you want all 3
The...
Fantastic post. Thanks for taking the time to write that. You covered 90% of what I really needed to know.
My only assumption is I’d have to move from pool to pool manually.
I tried creating a test pool with a funny result. Something happened between the volume creation and mount point. I’m...
I'm re-working a few things in the structure of my startup's data storage and r&d lab. Since I've been working, and somewhat halting on the super high performance data serving need in the r&d lab. I'm taking a quick break to tackle, what should be a much easier challenge, and that is my primary...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.