DaveInTexas's latest activity
-
DClearing up some items I just found in my storage (had no idea i still had these): R2208GZ4GC 2U barebones server with Intel...
-
DDaveInTexas replied to the thread Supermicro X9/X10/X11 Fan Speed Control.Glad you got it sorted!
-
DDaveInTexas reacted to Z0eff's post in the thread Supermicro X9/X10/X11 Fan Speed Control with
Like.
To give an update on this, turns out it wasn't the motherboard at all! The 2 fans that were attached to the FAN4 header seem to draw an... -
DDaveInTexas replied to the thread Supermicro X9/X10/X11 Fan Speed Control.Appreciate the effort to test your board, and to report your findings on this forum. FWIW, my understanding is neither the X9SRL...
-
DDaveInTexas reacted to nabsltd's post in the thread Supermicro X9/X10/X11 Fan Speed Control with Like.
It looks like the X9SRL-F falls into the "can't manually control the duty cycle" category. I can set the thresholds (although there is...
-
DDaveInTexas replied to the thread Supermicro X9/X10/X11 Fan Speed Control.Yeah, I wish you good luck, but share your sentiment. I'd be inclined to RMA that board if that's an option. Otherwise it's likely best...
-
DDaveInTexas replied to the thread Supermicro X9/X10/X11 Fan Speed Control.That is to be expected given what you posted afterwards: sudo ipmitool raw 0x30 0x70 0x66 0x01 0x01 0x64 says "set fan zone 1 fans to...
-
DDaveInTexas reacted to Negative Entropy's post in the thread Supermicro X9/X10/X11 Fan Speed Control with Like.
FWIW I recall only being able to change the lowers. Well, those were also the only ones I was worried about. Also Noctuas as I recall...
-
DDaveInTexas replied to the thread Supermicro X9/X10/X11 Fan Speed Control.Based on my research, my understanding is that board does not support manual fan speed control via IPMI. I believe they only have...
-
DDaveInTexas replied to the thread Supermicro X9/X10/X11 Fan Speed Control.@peter_s thanks for posting this info. Interesting the fan hysteresis is so high, and an odd number. That implies the max fan speed the...
-
DDaveInTexas reacted to peter_s's post in the thread Supermicro X9/X10/X11 Fan Speed Control with Like.
An interesting new experience related to AST2600 BMC chip and X13SAE-F motherboard from an smfc user can be found here. The point is...